This book spine calculator sizes a paperback cover. Enter the page count, choose the paper (KDP white, cream or colour, or your printer's thickness) and the trim size, and it gives the spine width in inches and millimetres, the full wrap-around cover dimensions with bleed, the pixel size at 300 DPI, and whether there is room for spine text. A batch mode handles a whole series. It runs in your browser.
| Pages | White | Cream |
|---|---|---|
| 100 | 0.225 | 0.250 |
| 200 | 0.450 | 0.500 |
| 300 | 0.676 | 0.750 |
| 400 | 0.901 | 1.000 |
| 500 | 1.126 | 1.250 |
Multiply the page count by the paper's thickness per page: 300 pages on KDP cream is 300 × 0.0025 = 0.75 in.
KDP's cream stock bulks more, so the same book has a wider spine on cream than on white.
Back + spine + front, plus 0.125 in bleed on each side: a 6 × 9 in book with a 0.45 in spine is 12.7 × 9.25 in.
KDP allows spine text on books with more than 79 pages; leave 0.0625 in clear on each side.
No. Everything runs in your browser.
Spine width = page count × thickness per page, plus an optional board allowance for hardcovers. KDP's published values are 0.002252 in per page for white paper and 0.0025 in for cream; colour and offset stocks use typical values and can be replaced with a custom caliper. The full cover is back + spine + front wide and trim height tall, plus bleed on every outside edge; pixel sizes are given at 300 DPI. Spine text is flagged when there are at least 80 pages. Batch mode sizes a list of titles.