Chromatic Tuner

This online chromatic tuner listens through your microphone and shows the note you are playing, how many cents sharp or flat it is, and a needle that settles in the green when you are in tune. Use it chromatically for any instrument or voice, or choose a preset for guitar in standard or drop D, 4-string bass, ukulele, violin or cello, and it locks onto the nearest string and tells you whether to tighten or loosen. Tap any string to hear its reference pitch, and recalibrate A4 from 440 Hz to 442 Hz or any value between 400 and 480 to match an orchestra or a recording. Pitch is detected with the YIN algorithm, which finds the true fundamental of rich string sounds rather than an overtone. It is free, needs no app, and the microphone sound is analysed in your browser, never recorded or uploaded.

Standard tuning frequencies at A4 = 440 Hz

InstrumentStrings (low to high)Frequencies (Hz)
GuitarE2 A2 D3 G3 B3 E482.41 · 110.00 · 146.83 · 196.00 · 246.94 · 329.63
BassE1 A1 D2 G241.20 · 55.00 · 73.42 · 98.00
UkuleleG4 C4 E4 A4392.00 · 261.63 · 329.63 · 440.00
ViolinG3 D4 A4 E5196.00 · 293.66 · 440.00 · 659.26
CelloC2 G2 D3 A365.41 · 98.00 · 146.83 · 220.00

When to use it

  1. Tune a guitar to standard or drop D before a gig or lesson.
  2. Tune a violin or cello to A = 442 Hz to match an orchestra.
  3. Check a ukulele's re-entrant G C E A tuning string by string.
  4. Practise singing in tune by watching the cents needle.
  5. Hear a reference note when you have no tuning fork.

How to Use

  1. Choose an instrument or leave it on Chromatic.
  2. Press Start tuner and allow the microphone.
  3. Play one note and let it ring.
  4. Adjust until the needle is in the green zone.

Features

  1. Chromatic note detection
  2. Cents readout and needle
  3. Guitar, drop D, bass, ukulele, violin and cello presets
  4. Nearest-string locking
  5. A4 calibration from 400 to 480 Hz
  6. Reference tones
  7. YIN pitch detection
  8. Microphone never recorded

FAQs

How do I tune my guitar with my microphone?

Choose Guitar — standard, press Start tuner, allow the microphone and pluck one string at a time. Tighten when the needle is left (flat) and loosen when it is right (sharp) until it turns green.

What does cents mean?

A cent is a hundredth of a semitone. Within about ±5 cents sounds in tune to most listeners.

What are the standard guitar string frequencies?

At A = 440 Hz: E2 82.41, A2 110.00, D3 146.83, G3 196.00, B3 246.94 and E4 329.63 Hz.

Is my microphone recorded?

No. The sound is analysed in your browser in real time and never stored or sent anywhere.

Why does the reading jump around?

Pluck one string, let it ring, and keep other strings quiet. Background noise and several notes at once confuse any tuner.

Technical Details

Microphone audio is read through a Web Audio AnalyserNode with echo cancellation, noise suppression and automatic gain turned off, because they distort pitch. About 16 times a second, 4,096 samples are analysed with the YIN algorithm: a difference function, cumulative-mean normalisation, the first dip below a 0.12 threshold, and parabolic interpolation for sub-sample precision. Readings below an RMS level or with clarity under 0.85 are ignored, and the median of the last five readings steadies the display. The note is the nearest equal-tempered pitch, 69 + 12 × log2(f ÷ A4), and the offset is shown in cents; A4 can be set from 400 to 480 Hz. With an instrument selected, the nearest string is chosen instead, and each string's reference tone can be played.

Audio Tools

Audio Tools

  • Speech to Text & Subtitles
  • Vocal Remover & Stem Splitter
  • Chord Transposer and Capo Finder
  • Delay and Reverb Time Calculator
  • Scale and Chord Finder
  • Song Key Finder
  • Neural Text to Speech
  • Audio Noise Remover