Creatinine Clearance Calculator

This creatinine clearance calculator estimates kidney function with the Cockcroft-Gault equation, the figure most drug labels use for renal dose adjustment. Enter age, sex, weight, height and serum creatinine in mg/dL or µmol/L, in metric or US units, and it calculates CrCl three ways: with actual body weight, with ideal body weight from the Devine formula, and with adjusted body weight for patients with obesity. The weight most protocols would pick is highlighted, and the result is placed in the FDA bands from normal to kidney failure. An optional switch rounds low creatinine up to 1.0 mg/dL for elderly or frail patients, where some units do this. Pharmacists can paste or drop a patient list and every row is calculated at once for a ward round. It is free, runs entirely in your browser, and no patient data is sent anywhere. It supports, but never replaces, clinical judgment.

CrCl for a 60-year-old weighing 70 kg

Serum creatinine (mg/dL)Male (mL/min)Female (mL/min)
0.89783
1.07866
1.55244
2.03933
3.02622

When to use it

  1. Check renal dosing for an antibiotic on a ward round.
  2. Decide which body weight to use for an obese patient's CrCl.
  3. Convert a lab's µmol/L creatinine into a Cockcroft-Gault estimate.
  4. Screen a whole ward's patients for drugs that need dose reduction.
  5. Teach pharmacy students how body-weight choice changes the result.

How to Use

  1. Enter age and sex.
  2. Enter weight and height in metric or US units.
  3. Enter serum creatinine and choose mg/dL or µmol/L.
  4. Read CrCl for each body weight and the suggested one; paste a CSV for a patient list.

Features

  1. Cockcroft-Gault equation
  2. Actual, ideal and adjusted body weight
  3. mg/dL and µmol/L
  4. kg or lb, cm or inches
  5. Optional creatinine round-up
  6. FDA renal function bands
  7. CSV patient list
  8. 100% client-side

FAQs

What is the Cockcroft-Gault formula?

CrCl = (140 − age) × weight in kg ÷ (72 × serum creatinine in mg/dL), multiplied by 0.85 for women.

Which weight should I use?

A common rule is actual weight if it is below ideal body weight, adjusted weight if it is more than 120% of ideal, and ideal weight otherwise. Some drug labels specify a weight; follow the label.

How do I convert µmol/L to mg/dL?

Divide by 88.4. A creatinine of 88 µmol/L is about 1.0 mg/dL.

Is creatinine clearance the same as eGFR?

No. eGFR from CKD-EPI is used to stage kidney disease, while Cockcroft-Gault CrCl is still the basis of most drug dosing tables. They can differ, especially in the elderly.

Is patient data stored?

No. Calculations run in your browser and nothing is uploaded.

Technical Details

Creatinine clearance is estimated with the Cockcroft-Gault equation: CrCl (mL/min) = (140 − age) × weight (kg) ÷ (72 × serum creatinine in mg/dL), multiplied by 0.85 for females. Creatinine in µmol/L is divided by 88.42. It is calculated with three weights: actual body weight; Devine ideal body weight, 50 kg (male) or 45.5 kg (female) plus 2.3 kg per inch of height over 5 feet; and adjusted body weight, IBW + 0.4 × (actual − IBW). The highlighted result follows the common convention of using actual weight when it is below ideal, adjusted weight above 120% of ideal, and ideal weight otherwise. An optional switch rounds creatinine below 1.0 mg/dL up to 1.0, a practice some protocols use for elderly or low-muscle-mass patients. Results are banded using the FDA renal-impairment categories.

Health & Fitness Tools

Health & Fitness Tools

  • One-Rep Max Calculator
  • Infusion Rate Calculator (mcg/kg/min)
  • eGFR Calculator (CKD-EPI 2021)
  • Body Surface Area (BSA) Calculator
  • Ideal & Adjusted Body Weight Calculator
  • QTc Calculator
  • Glasgow Coma Scale (GCS) Calculator
  • APGAR Score Calculator