This dimensional weight calculator shows what a carrier will actually bill for a parcel: the larger of its real weight and its size-based DIM weight. Pick a divisor — 139 for FedEx, UPS and, since July 2026, USPS in inches and pounds, 5,000 for express couriers such as DHL in centimeters and kilograms, 6,000 for air freight, or any custom figure from your contract — then enter the box's length, width, height and weight. It rounds each side up the way carriers do, bills in 0.5 or 1 kg or lb steps, and tells you whether you are paying for weight or for air. When it is dimensional, it shows how small the box would need to be to bill on actual weight. E-commerce sellers can paste or drop a whole order export and every parcel is calculated with a quantity column. It is free, runs in your browser, and your order data never leaves your device.
| Box (cm) | Volume (cm³) | ÷5,000 courier | ÷6,000 air |
|---|---|---|---|
| 30 × 20 × 15 | 9,000 | 1.8 kg | 1.5 kg |
| 40 × 30 × 20 | 24,000 | 4.8 kg | 4.0 kg |
| 50 × 40 × 30 | 60,000 | 12.0 kg | 10.0 kg |
| 60 × 40 × 40 | 96,000 | 19.2 kg | 16.0 kg |
Multiply length × width × height and divide by the carrier's divisor, such as 139 for inches and pounds or 5,000 for centimeters and kilograms.
The larger of the actual weight and the dimensional weight, usually rounded up to the next pound or half kilogram.
USPS moved from 166 to 139 in July 2026, matching FedEx and UPS daily rates. Always check the carrier's current service guide.
A larger divisor gives a smaller dimensional weight, so air freight at 6,000 bills bulky cargo less than an express courier at 5,000.
No. Everything is calculated in your browser.
Dimensional (volumetric) weight is length × width × height ÷ the carrier's divisor: 139 in³/lb for FedEx and UPS daily rates and for USPS since July 2026, 166 in³/lb for some retail and international rates, 5,000 cm³/kg for express couriers and 6,000 cm³/kg for IATA air freight. By default each side is rounded up to the next whole inch or centimeter first, as most carriers do. The billable weight is the larger of actual and dimensional weight, rounded up to the chosen step (0.5 or 1 kg or lb). Batch mode multiplies by a quantity column for multi-box orders. When the parcel bills on dimensional weight, the tool also shows the largest box volume that would bill on actual weight instead.