This ND filter calculator gives the shutter speed for long exposures with a neutral density filter. Enter the aperture, the shutter speed your meter suggests and the ISO, choose an ND filter from ND2 to ND100000, and it gives the new exposure time, along with the scene's exposure value and an equivalent exposure at a different aperture or ISO. A chart covers common speeds for 3, 6, 10 and 15-stop filters. It runs in your browser.
| Metered | ND8 (3 stops) | ND64 (6 stops) | ND1000 (10 stops) |
|---|---|---|---|
| 1/1000 | 1/125 | 1/15 | 1s |
| 1/250 | 1/30 | 0.3s | 4.1s |
| 1/60 | 1/8 | 1.1s | 17s |
| 1/15 | 0.5s | 4.3s | 68s |
Multiply the shutter time by 2 for each stop: 1/125 s with a 10-stop ND1000 becomes about 8 seconds.
About 10 stops (log₂ 1000 ≈ 9.97); its optical density is 3.0.
A single number for aperture and shutter combinations that give the same exposure; EV 15 is bright sun at ISO 100.
Strong ND filters can add a colour cast; set a custom white balance or correct it later.
No. Everything runs in your browser.
Exposure value at ISO 100 is EV = log₂(N² ÷ t) − log₂(ISO ÷ 100), matched to typical scenes (sunny 16 at EV 15). Each stop of neutral density halves the light, so the shutter time with a filter is t × 2^stops; filter factors and optical densities map to stops (ND1000 ≈ 10 stops, density 0.3 per stop). Equivalent exposures keep EV constant: a new aperture or ISO gives the required shutter time, also rounded to the nearest standard speed. Batch mode converts a list of metered shutter speeds.