Fabric Shrinkage and Skew Calculator

This fabric shrinkage calculator turns wash-test measurements into results. Enter the benchmark distances before and after washing for length and width to get dimensional change, add the displacement of a straight line to get skew or spirality, and see pass or fail against your buyer's limit. Work out how much bigger to cut panels, and paste a lab sheet to check a whole set of samples.

Dimensional change on 350 mm benchmarks

BeforeAfterChange
350 mm343 mm−2.0%
350 mm336 mm−4.0%
350 mm329 mm−6.0%
500 mm485 mm−3.0%

When to use it

  1. Report wash test results.
  2. Check fabric lots against buyer limits.
  3. Allow for shrinkage in pattern making.
  4. Measure spirality in knits.
  5. Compare finishing processes.

How to Use

  1. Enter measurements before and after.
  2. Add skew displacement.
  3. Set the limit.
  4. Read results or batch a lab sheet.

Features

  1. Length and width change
  2. Skew / spirality
  3. Pass or fail
  4. Cut-size allowance
  5. Batch tests
  6. 100% client-side

FAQs

How is shrinkage calculated?

(after − before) ÷ before × 100; 350 mm shrinking to 336 mm is −4%.

Why is shrinkage negative?

AATCC 135 and ISO 5077 report change, so shrinkage is negative and growth positive.

What is spirality?

The twisting of knitted fabric after washing, measured as sideways displacement over a length.

What limit is normal?

Many buyers accept ±3–5%, but it's set in the buyer's specification.

Is my data uploaded?

No. Everything is calculated in your browser.

Technical Details

Dimensional change % = (after − before) ÷ before × 100 for each direction, the sign convention of AATCC 135 and ISO 5077, so a negative figure is shrinkage and a positive one growth. Skew or spirality % = sideways displacement ÷ benchmark length × 100. Each direction is compared with the buyer's ± limit. The cut size needed to finish at a target size after shrinkage is finished ÷ (1 + change). Batch mode checks many test samples at once.

Calculators & Converters

Calculators & Converters

  • Aspect Ratio Calculator
  • Compound Interest Calculator
  • Statistics Calculator
  • Area & Perimeter Calculator
  • Volume & Surface Area Calculator
  • Permutation & Combination Calculator
  • Equation Solver
  • Quadratic Equation Solver