This PCR master mix calculator works out how much of each reagent to pipette. Pick a starting recipe — standard Taq, high-fidelity or SYBR qPCR — or enter your own components with stock and final concentrations, then set the reaction volume, number of reactions, overage and template volume. It gives the volume per reaction and for the whole master mix, including water, and exports the recipe as CSV. It runs in your browser.
| Component | Per reaction | Master mix |
|---|---|---|
| 10× buffer | 2.5 µL | 27.5 µL |
| MgCl₂ 25 mM → 1.5 mM | 1.5 µL | 16.5 µL |
| dNTPs 10 mM → 0.2 mM | 0.5 µL | 5.5 µL |
| Each primer 10 µM → 0.2 µM | 0.5 µL | 5.5 µL |
| Taq 5 U/µL → 0.025 U/µL | 0.125 µL | 1.4 µL |
About 10%, or one extra reaction per ten, to cover pipetting loss.
Final ÷ stock × reaction volume: a 10× buffer at 1× in 25 µL needs 2.5 µL.
No. Add template to each tube separately; the calculator leaves room for it.
They're typical values; always follow the polymerase manufacturer's recommendations.
No. Everything runs in your browser.
Each component's volume per reaction = final concentration ÷ stock concentration × reaction volume, with stock and final in the same unit. Water makes up the reaction volume after all components and the template added per tube. Master mix volumes multiply each by the number of reactions plus the overage percentage. Presets give typical Taq, high-fidelity and SYBR qPCR recipes, all editable, and a table compares them at your volume and reaction count.