Process Capability Calculator (Cp, Cpk)

This process capability calculator tells you whether a process can hold its tolerance. Paste measurements in production order and enter the lower and upper specification limits, and it gives Cp, Cpk, Pp and Ppk with a rating, the expected parts per million out of spec, and a histogram with the limits and a fitted normal curve you can download as SVG. One-sided limits work too. Paste a table of parts and characteristics to calculate them all. It runs in your browser.

Cpk and expected defects (centred, normal)

CpkSigma levelExpected ppm out of spec
0.672σ45,500
1.003σ2,700
1.334σ63
1.675σ0.57
2.006σ0.002

When to use it

  1. Run a capability study for a PPAP submission.
  2. Check a new machine against its acceptance criteria.
  3. See whether a process needs centring or less variation.
  4. Report Cpk for critical characteristics to a customer.
  5. Teach the difference between Cp, Cpk, Pp and Ppk.

How to Use

  1. Paste measurements in time order.
  2. Enter LSL and/or USL.
  3. Read Cp, Cpk, Pp, Ppk and ppm.
  4. Download the histogram or batch many parts.

Features

  1. Cp, Cpk, Pp and Ppk
  2. Expected ppm out of spec
  3. Histogram with limits
  4. One- or two-sided specs
  5. Batch by characteristic
  6. 100% client-side

FAQs

What is the difference between Cp and Cpk?

Cp compares the tolerance width with the process spread; Cpk also accounts for how far the mean is from the nearer limit. A centred process has Cp = Cpk.

What Cpk value is acceptable?

1.33 is a common minimum, 1.67 is often required for new or safety-critical characteristics, and below 1.0 the process makes out-of-spec parts.

What is the difference between Cpk and Ppk?

Cpk uses short-term within-process variation (moving range); Ppk uses the overall standard deviation, so it includes drift between subgroups.

How many measurements do I need?

At least 30, and 100 or more for a reliable estimate. Keep them in time order.

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

The mean and overall standard deviation come from the data; within-process sigma is the average moving range ÷ d2 (1.128). Cp = (USL − LSL) ÷ 6σwithin and Cpk = min(USL − mean, mean − LSL) ÷ 3σwithin. Pp and Ppk use the overall standard deviation. Expected parts per million outside the limits come from the normal distribution with the overall sigma. One-sided specifications give Cpk and Ppk only. Batch mode reads a row per characteristic with the values in one cell.

Business & Legal Tools

Business & Legal Tools

  • Control Chart Builder (X-bar R, I-MR, p)
  • DPMO and Sigma Level Calculator
  • Contract Compare (DOCX and PDF Redline)
  • Legal Deadline Calculator (Court Days)
  • Document Template Filler (DOCX Mail Merge)
  • Sample Size Calculator (A/B Test and Survey)
  • Ad Metrics Calculator (CPM, CPC, CTR, CPA, ROAS)
  • Email Signature Generator