This RAID calculator shows how much space and protection each RAID level gives. Enter the number of drives and their size, or a list of mixed sizes, and choose RAID 0, 1, 5, 6 or 10 to see usable capacity, efficiency, how many drive failures it survives, relative read speed and the write penalty, with every level compared side by side. Capacity is also shown in TiB as your operating system reports it. It runs in your browser.
| Level | Usable | Survives |
|---|---|---|
| RAID 0 | 48 TB | None |
| RAID 1 | 8 TB | 5 drives |
| RAID 5 | 40 TB | 1 drive |
| RAID 6 | 32 TB | 2 drives |
| RAID 10 | 24 TB | 1 guaranteed |
(n − 1) × drive size: four 4 TB drives give 12 TB.
RAID 6 gives more capacity and survives any two failures; RAID 10 writes faster and rebuilds quicker but survives only one guaranteed failure.
Drives are sold in decimal terabytes; operating systems often show binary tebibytes.
No. It protects against drive failure, not deletion, ransomware or controller failure.
No. Everything runs in your browser.
Every drive is treated as the smallest in the set. RAID 0: n × size, no fault tolerance. RAID 1: one drive's capacity, survives n − 1 failures. RAID 5: (n − 1) × size, one failure, at least 3 drives. RAID 6: (n − 2) × size, two failures, at least 4 drives. RAID 10: n ÷ 2 × size with an even number of at least 4 drives, one failure guaranteed. Read speed scales with data drives; the write penalty (1, 2, 4, 6, 2) is back-end I/Os per random write. Capacity is also shown in TiB.