Veterinary Fluid and CRI Calculator

This calculator works out fluid therapy and constant-rate infusions for dogs and cats. Enter the species and weight to get the daily maintenance volume, add a dehydration percentage and ongoing losses, and choose how fast to replace the deficit; it gives the hourly rate, drops per minute for your giving set and the total for the first 24 hours. For a CRI, enter the dose and the drug's concentration to get the syringe-pump rate, or the millilitres to add to a fluid bag so the drug runs at the right dose at your fluid rate. Clinics can paste a patient list or a drug list. It runs in your browser.

Maintenance fluids per day (132 × kg^0.75 for dogs, 80 × kg^0.75 for cats)

WeightDogCat
2 kg222 mL135 mL
4 kg373 mL226 mL
10 kg742 mL450 mL
20 kg1,248 mL—
30 kg1,692 mL—
40 kg2,100 mL—

When to use it

  1. Set up IV fluids for a dehydrated dog or cat.
  2. Work out drops per minute when no fluid pump is free.
  3. Prepare a fentanyl, ketamine or lidocaine CRI in a fluid bag.
  4. Check a syringe-pump rate for an inotrope.
  5. Calculate fluid plans for every hospitalised patient at rounds.

How to Use

  1. Choose dog or cat and enter the weight.
  2. Add dehydration, the replacement time and any ongoing losses.
  3. Read the fluid rate and drip rate.
  4. For a CRI, enter the dose and concentration, and the bag volume if mixing in fluids.

Features

  1. Dog and cat maintenance (allometric or linear)
  2. Dehydration deficit and ongoing losses
  3. Drops per minute for any giving set
  4. CRI on a syringe pump
  5. CRI mixed in a fluid bag
  6. Patient and drug CSV
  7. 100% client-side

FAQs

What maintenance rate does it use?

By default 132 × kg^0.75 mL/day for dogs and 80 × kg^0.75 for cats. You can switch to the linear 60 mL/kg/day for dogs and 40 mL/kg/day for cats from the 2024 AAHA Fluid Therapy Guidelines.

How is the dehydration deficit calculated?

Body weight in kg × % dehydration × 10 gives the deficit in mL; a 20 kg dog at 6% needs 1,200 mL replaced, often over 12 to 24 hours.

How much drug do I add to the bag for a CRI?

mg per hour × bag volume ÷ fluid rate. For 3 mg/h in a 500 mL bag running at 25 mL/h, add 60 mg.

Should I remove fluid before adding the drug?

If you need the exact concentration, remove the same volume of fluid from the bag before adding the drug.

Does it replace a formulary?

No. Check doses against a formulary and adjust fluids to the patient; this supports, not replaces, clinical judgment.

Technical Details

Maintenance fluid for dogs is 132 × kg^0.75 mL/day and for cats 80 × kg^0.75 mL/day, or the linear 60 and 40 mL/kg/day given in the 2024 AAHA Fluid Therapy Guidelines. The dehydration deficit is kg × % dehydration × 10 mL, replaced over a chosen number of hours, and ongoing losses are added per day. The hourly rate is converted to drops per minute for the chosen giving set. For a constant-rate infusion the dose (mcg/kg/min, mcg/kg/h, mg/kg/h or mg/kg/min) times weight gives mg per hour; dividing by the stock concentration gives the syringe-pump rate, and mg per hour × bag volume ÷ fluid rate gives the amount to add to a bag. Batch modes take a patient list and a drug list.

Health & Fitness Tools

Health & Fitness Tools

  • Ovulation and Fertile Window Calculator
  • Nutrition Facts Label Maker
  • Running Pace and Race Time Predictor
  • HIIT and Tabata Interval Timer
  • Cooper Test VO2 Max Calculator
  • Exercise Rep Counter and Form Check
  • BMR Calculator
  • TDEE Calculator