This 3D print cost calculator prices a print from the weight and time your slicer reports. Pick the material and filament diameter, enter the part weight, print time and quantity, and set your filament price, printer power, electricity tariff, printer cost and life, labour, failure allowance and markup. It gives the cost and price per part, the job total and the filament length used. Paste a list of jobs to quote them all. It runs in your browser.
| Material | Density (g/cm³) | 1.75 mm | 2.85 mm |
|---|---|---|---|
| PLA | 1.24 | 335 m | 126 m |
| PETG | 1.27 | 327 m | 123 m |
| ABS | 1.04 | 400 m | 151 m |
| TPU | 1.21 | 344 m | 130 m |
About 335 m of 1.75 mm PLA, 327 m of PETG and 400 m of ABS; 2.85 mm filament gives about 126 m of PLA.
Add material (weight × price per gram), electricity (kW × hours × tariff), machine wear (printer cost ÷ life × hours) and labour, then add a failure allowance and markup.
Most desktop FDM printers average 100–200 W while printing; a heated enclosure or large bed uses more.
The slicer's estimate including supports, brim and purge.
No. Everything runs in your browser.
Material cost = grams ÷ 1000 × price per kg. Electricity = printer watts ÷ 1000 × print hours × tariff. Machine wear = printer cost ÷ expected life hours × print hours. Maintenance = rate per hour × hours; labour = hours × rate. The subtotal is increased by the failure allowance, then the markup gives the selling price. Filament length = mass ÷ (density × π × (diameter ÷ 2)²), with densities for PLA, PETG, ABS, ASA, TPU, nylon, PC and resin. Batch mode prices a list of jobs.