This STL viewer opens 3D models in your browser and measures them. Drop one or many STL files, binary or ASCII, and drag to rotate each model. It reports the bounding-box size, volume, surface area and triangle count, warns when a mesh isn't watertight, and estimates printed weight, filament length and material cost from your infill and wall settings. Download a CSV report of every file and a ZIP of preview images. Nothing is uploaded.
| Material | Density (g/cm³) | Mass |
|---|---|---|
| PLA | 1.24 | 1.24 g |
| PETG | 1.27 | 1.27 g |
| ABS | 1.04 | 1.04 g |
| Nylon (PA) | 1.14 | 1.14 g |
| Standard resin | 1.10 | 1.10 g |
Each triangle forms a tetrahedron with the origin; adding their signed volumes gives the enclosed volume, exact for a watertight mesh.
Every edge is shared by exactly two triangles, so the mesh encloses a volume. Open meshes give unreliable volumes and can fail to slice.
STL has no units; most are in millimetres. Switch to inches if the model came from an inch-based CAD system.
It's a quoting estimate from wall thickness and infill; your slicer's figure is the final word.
No. Everything runs in your browser.
Binary and ASCII STL files are parsed in the browser. Volume is the sum of signed tetrahedron volumes from the origin to each triangle (exact for a closed mesh), surface area the sum of triangle areas, and size the bounding box. A mesh is watertight when every edge is shared by exactly two triangles. Printed mass = (shell of wall thickness + infill % of the remaining volume) × material density. Meshes are drawn on a canvas with flat shading and can be rotated by dragging.