This dyeing recipe calculator works out exactly how much dye, salt, alkali and auxiliaries to weigh for a dye bath. Enter batch weight, liquor ratio, each dye's shade percentage and each chemical's g/L dose to get grams and kilograms, stock solution volumes and a downloadable recipe sheet. Suggested reactive salt and soda doses follow the total shade, and a batch mode prepares a whole day's dye lots.
| Total shade | Salt g/L | Soda ash g/L |
|---|---|---|
| Up to 0.5% | 20 | 8 |
| 0.5–1% | 40 | 12 |
| 1–2% | 60 | 16 |
| 2–4% | 70 | 20 |
| Over 4% | 80 | 20 |
Dye (g) = fabric weight (g) × shade %: 100 kg at 2% needs 2 kg of dye.
Salt (kg) = g/L × bath litres ÷ 1000; the bath is fabric kg × liquor ratio.
Litres of bath per kg of fabric: 1:8 means 8 L for every kg.
No, they're typical starting points; follow your dye supplier's shade card.
No. Everything is calculated in your browser.
Bath volume (L) = batch weight (kg) × liquor ratio (1:R). Dyes are dosed on the weight of fabric: grams = batch kg × 1000 × shade % ÷ 100; with a stock solution, volume = grams ÷ stock concentration. Chemicals and auxiliaries are dosed on the bath: grams = g/L × litres. For reactive dyeing, suggested salt and soda ash rise with total shade (from about 20 g/L salt and 8 g/L soda at 0.5% to 80 and 20 above 4%), as typical starting points to adjust to the dye maker's recommendations. Batch mode prepares recipes for many lots.