This irrigation calculator tells you how much water a crop needs and how long to run the pump. Pick the crop and growth stage for its coefficient, enter the reference evapotranspiration from your weather service, the period, effective rainfall, irrigation efficiency and area, and it gives crop water use, net and gross irrigation depth, the water volume and the pump hours. Paste a list of fields to schedule them all. It runs in your browser.
| Crop | Initial | Mid | Late |
|---|---|---|---|
| Wheat | 0.3 | 1.15 | 0.3 |
| Maize | 0.3 | 1.20 | 0.6 |
| Rice | 1.05 | 1.20 | 0.75 |
| Cotton | 0.35 | 1.18 | 0.6 |
| Sugarcane | 0.4 | 1.25 | 0.75 |
ETc = Kc × ETo. Maize at mid-season (Kc 1.2) with ETo 6 mm/day uses 7.2 mm/day.
10 m³ (10,000 litres).
Around 90% for drip, 75% for sprinklers and 60% for furrow irrigation.
From a local weather station or agricultural extension service, or calculate it with the FAO Penman–Monteith method.
No. Everything runs in your browser.
Crop evapotranspiration ETc = Kc × ETo (FAO-56), with typical single crop coefficients for initial, mid-season and late stages. Net irrigation = ETc over the period − effective rainfall; gross irrigation = net ÷ system efficiency (drip about 90%, sprinkler 75%, furrow 60%). Volume = gross depth (mm) × 10 × area (ha) in cubic metres, and pump run time = volume ÷ flow rate. Batch mode calculates every field from a list.