Spectacle to Contact Lens Converter

This converter turns a glasses prescription into the power a contact lens needs. Glasses sit about 12 mm in front of the eye, so a strong lens has a different effect there than on the cornea: a −6.00 D spectacle lens corresponds to about −5.60 D at the eye, and a +8.00 D lens to about +8.85 D. Enter the sphere, cylinder, axis and vertex distance and get the exact corneal power and the nearest 0.25 D step, with toric prescriptions converted meridian by meridian. Opticians can convert a list of prescriptions from a CSV. It converts power only — a contact lens fitting is still needed.

Spectacle to contact lens power at 12 mm

SpectacleAt the corneaRounded
−4.00−3.82−3.75
−6.00−5.60−5.50
−8.00−7.30−7.25
−10.00−8.93−9.00
+4.00+4.20+4.25
+8.00+8.85+8.75

When to use it

  1. Work out a starting contact lens power from a spectacle prescription.
  2. Check whether the vertex adjustment matters for a prescription.
  3. Convert a toric prescription meridian by meridian.
  4. Teach vertex distance in optometry classes.
  5. Convert a list of prescriptions before ordering trial lenses.

How to Use

  1. Enter the spectacle sphere, cylinder and axis.
  2. Set the vertex distance, usually 12 mm.
  3. Read the contact lens power rounded to 0.25 D and the exact value.
  4. Paste or drop a CSV to convert many prescriptions.

Features

  1. Vertex distance compensation
  2. Toric prescriptions by meridian
  3. Plus-to-minus cylinder transposition
  4. Exact and 0.25 D rounded powers
  5. Flag when the adjustment matters
  6. Batch CSV
  7. 100% client-side

FAQs

When does vertex distance matter?

From about ±4.00 D. Below that the difference is smaller than the 0.25 D steps lenses come in, so the spectacle power is usually used.

Why do minus prescriptions get weaker and plus ones stronger?

Moving a lens closer to the eye reduces the effective power of a minus lens and increases that of a plus lens, so the contact lens needs less minus or more plus.

How is the cylinder converted?

Each principal meridian is converted on its own, and the new cylinder is the difference between them. A plus-cylinder prescription is transposed to minus cylinder first.

What vertex distance should I use?

The distance measured for the glasses, often 12 mm; it is usually on the prescription or the lab order.

Can I order contact lenses with this?

No. Contact lenses need a fitting and a contact lens prescription for base curve, diameter and material; this converts power only.

Technical Details

The power needed at the cornea is Fc = F ÷ (1 − d·F), where F is the spectacle power in dioptres and d the vertex distance in metres (12 mm by default). A plus-cylinder prescription is first transposed to minus-cylinder form. Each principal meridian — the sphere, and sphere plus cylinder — is converted separately and the contact lens cylinder is the difference between them; the axis is unchanged. Results are shown exactly and rounded to the nearest 0.25 D. The adjustment is flagged when either meridian is ±4.00 D or stronger. Batch mode converts a CSV of prescriptions.

Health & Fitness Tools

Health & Fitness Tools

  • ICD-10-CM Code Lookup
  • SBAR Handoff Note Builder
  • Shift Roster Maker
  • Veterinary Fluid and CRI Calculator
  • Ovulation and Fertile Window Calculator
  • Nutrition Facts Label Maker
  • Running Pace and Race Time Predictor
  • HIIT and Tabata Interval Timer