This bearing and distance calculator handles everyday survey calculations. Give two grid points to get the distance, whole-circle and quadrant bearings and the back bearing; give two GPS points to get the great-circle distance and initial bearing; or enter a start point and a list of bearing and distance legs to compute a traverse, its misclosure and precision, and coordinates adjusted by the Bowditch rule. Paste a list of point pairs to work out every leg. It runs in your browser.
| Whole circle | Quadrant |
|---|---|
| 45° | N 45° E |
| 135° | S 45° E |
| 225° | S 45° W |
| 315° | N 45° W |
| 143° 08′ | S 36° 52′ E |
Bearing = atan2(ΔEasting, ΔNorthing), measured clockwise from north and brought into 0–360°.
A bearing written from north or south toward east or west, such as N 45° E or S 30° W.
The gap between where the traverse ends and where it should close; precision is perimeter ÷ misclosure, such as 1:20,000.
It spreads the misclosure along the traverse in proportion to each leg's length.
No. Everything runs in your browser.
Between grid points the distance is √(ΔE² + ΔN²) and the whole-circle bearing atan2(ΔE, ΔN) from grid north, also given as a quadrant bearing (such as S 36° 52′ E) and a back bearing. Between GPS points the haversine formula on a 6,371,008.8 m sphere gives distance and the initial bearing. A traverse runs from a start point through bearing-distance legs; the linear misclosure, its ratio to the perimeter, and Bowditch (compass rule) adjusted coordinates are reported. Bearings can be decimal, DMS or quadrant. Batch mode reads point pairs.