Density Altitude Calculator

This density altitude calculator shows how high your aircraft thinks it is. Enter the field elevation, altimeter setting in inHg or hPa, the outside air temperature and optionally the dew point, and it gives the pressure altitude, the ISA temperature and deviation, and the density altitude — with a warning when it's far above field elevation. Paste several airports to check them for a hot day. It runs in your browser.

Density altitude at 29.92 inHg

ElevationTemperatureDensity altitude
Sea level15 °C≈ 0 ft
Sea level35 °C2,277 ft
2,500 ft30 °C4,771 ft
5,000 ft30 °C7,803 ft
7,000 ft25 °C9,690 ft

When to use it

  1. Check take-off performance on a hot day.
  2. Plan departures from high-altitude airfields.
  3. Teach why aircraft perform worse in heat.
  4. Compare airports on a summer route.
  5. Brief drone or helicopter operations at altitude.

How to Use

  1. Enter field elevation.
  2. Enter the altimeter setting and temperature.
  3. Optionally add the dew point.
  4. Read pressure altitude, ISA deviation and density altitude.

Features

  1. Pressure altitude from QNH or inHg
  2. Exact density altitude
  3. Humidity option
  4. ISA deviation
  5. Rule-of-thumb comparison
  6. Batch airports
  7. 100% client-side

FAQs

What is density altitude?

The altitude in the standard atmosphere that has the same air density as the actual conditions; it governs engine power, lift and propeller thrust.

How do I estimate it quickly?

Density altitude ≈ pressure altitude + 120 ft × (temperature − ISA temperature).

Does humidity matter?

Slightly: humid air is less dense; add the dew point to include it.

What is pressure altitude?

The altitude shown with the altimeter set to 29.92 inHg (1013.25 hPa).

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

Pressure altitude = elevation + 145,366.45 × (1 − (setting ÷ 1013.25 hPa)^0.190284). The ISA pressure at that altitude and the actual temperature (with water vapour pressure from the dew point, if given) give air density by the ideal gas law; density altitude is the ISA altitude with the same density, 145,442.16 × (1 − (ρ/ρ0)^0.234969) ft. ISA temperature is 15 °C − 1.98 °C per 1,000 ft; the 120 ft per °C rule of thumb is shown for comparison.

Calculators & Converters

Calculators & Converters

  • Aircraft Weight and Balance Calculator
  • METAR and TAF Decoder
  • Great-Circle Distance and ETA Calculator
  • Boat Fuel Range Calculator
  • Speeds and Feeds Calculator
  • Sheet Metal Bend Allowance Calculator
  • 3D Print Cost and Filament Calculator
  • STL Viewer and Volume Calculator