Crosswind and Headwind Component Calculator

This crosswind calculator gives the crosswind and headwind components for any runway. Enter the runway number, the wind direction and speed and any gusts, and it shows the crosswind (and from which side), the headwind or tailwind, and whether you're within your personal crosswind limit. List an airport's runways to see which end gives the most headwind. Paste several reports to check them at once. It runs in your browser.

Crosswind as a share of wind speed

Angle off runwayCrosswindHeadwind
10°17%98%
20°34%94%
30°50%87%
45°71%71%
60°87%50%
90°100%0%

When to use it

  1. Decide whether a landing is within your crosswind limit.
  2. Pick the runway with the best headwind.
  3. Brief students on crosswind components.
  4. Check a gusty forecast before departure.
  5. Compare runways across airports on a route.

How to Use

  1. Enter the runway and the wind.
  2. Add gusts and your limit.
  3. Read crosswind and headwind.
  4. List runways or paste reports to compare.

Features

  1. Crosswind and headwind/tailwind
  2. Gust components
  3. Personal limit check
  4. Best runway
  5. Batch CSV
  6. 100% client-side

FAQs

How do I calculate crosswind?

Crosswind = wind speed × sin(angle between wind and runway). 20 kt at 30° off the runway gives 10 kt of crosswind.

What is the rule of thumb?

At 30° off the runway the crosswind is about half the wind, at 45° about 70%, and at 60° or more about all of it.

Should I use gusts?

Yes, compare the gust crosswind against your limit.

Are runway numbers true or magnetic?

Magnetic; METAR winds are true and ATIS winds magnetic, so convert before comparing where variation is large.

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

The angle between the wind and the runway heading (runway number × 10) gives crosswind = wind × sin(angle) and headwind = wind × cos(angle); a negative headwind is a tailwind. Gusts are resolved the same way and compared with the pilot's crosswind limit. For an airport's runways both ends are evaluated and ranked by headwind. Batch mode checks several runways and wind reports.

Calculators & Converters

Calculators & Converters

  • Density Altitude Calculator
  • Aircraft Weight and Balance Calculator
  • METAR and TAF Decoder
  • Great-Circle Distance and ETA Calculator
  • Boat Fuel Range Calculator
  • Speeds and Feeds Calculator
  • Sheet Metal Bend Allowance Calculator
  • 3D Print Cost and Filament Calculator