This centrifuge calculator converts between RPM and relative centrifugal force (× g). Enter your rotor's radius, then type a speed to get the g-force or a g-force to get the speed to set. A reference table covers common speeds and radii, and you can paste protocol steps to convert them all for your rotor. It runs in your browser.
| RPM | RCF |
|---|---|
| 1,000 | 112 × g |
| 3,000 | 1,006 × g |
| 5,000 | 2,795 × g |
| 10,000 | 11,180 × g |
| 15,000 | 25,155 × g |
RCF = 1.118 × 10⁻⁵ × radius (cm) × RPM². 3,000 RPM at 10 cm is about 1,006 × g.
The maximum radius, from the centre of the rotor to the bottom of the tube; it's printed on the rotor or in its manual.
The same RPM produces different forces in rotors of different sizes; × g is the same everywhere.
About 7–8.5 cm, giving roughly 13,000–16,000 × g at 13,000–14,000 RPM.
No. Everything runs in your browser.
Relative centrifugal force RCF = 1.118 × 10⁻⁵ × r × RPM², where r is the radius in centimetres from the rotor axis to the bottom of the tube. Rearranged, RPM = √(RCF ÷ (1.118 × 10⁻⁵ × r)). A table shows g-force for common speeds and radii, and batch mode converts each protocol step given in RPM or × g with its own radius.