This circular knitting production calculator estimates output for single jersey, rib and interlock machines. Enter cylinder diameter, gauge, feeders, RPM, stitch length, yarn count and efficiency to get kilograms per hour, shift and day, needle count and courses per minute, with the tightness factor as a fabric check. Paste your machine list to plan the whole knitting floor.
| Machine | Settings | Kg/day |
|---|---|---|
| 30" × 24G SJ | 90 feeders, 25 rpm, 2.8 mm, 30s | 343 |
| 34" × 28G SJ | 102 feeders, 22 rpm, 2.6 mm, 34s | 371 |
| 30" × 20G SJ | 96 feeders, 28 rpm, 3.0 mm, 24s | 458 |
Kg/hour = needles × feeders × RPM × 60 × stitch length (mm) × tex × efficiency ÷ 10⁹.
π × diameter × gauge: a 30-inch, 24-gauge machine has 2262.
Choose two beds; both needle beds knit at each feeder.
√tex ÷ stitch length in mm; single jersey is usually about 1.3–1.6.
No. Everything is calculated in your browser.
Needles = π × cylinder diameter (in) × gauge (needles per inch), doubled for rib and interlock where both beds knit. Each needle forms one loop per feeder per revolution, so yarn per hour (m) = needles × feeders × RPM × 60 × stitch length (mm) ÷ 1000 × efficiency, and kg per hour = metres × tex ÷ 10⁶. The tightness factor √tex ÷ stitch length (mm) is shown as a fabric check. Batch mode calculates every machine on the floor.