Plot Area from Coordinates Calculator

This plot area calculator measures a piece of land from the coordinates of its corners. Paste the corners in order — as easting and northing from a survey, or as latitude and longitude from a GPS or phone — and it gives the area in square metres, hectares, acres, square feet, kanal and marla, the perimeter, and each side's length and bearing. Paste a list of plots to measure them all. It runs in your browser.

Area unit conversions

UnitSquare metres
1 hectare10,000
1 acre4,046.86
1 kanal (20 marla)505.86
1 marla (272.25 ft²)25.29
1,000 ft²92.90

When to use it

  1. Check the area of a plot from its survey coordinates.
  2. Measure a field walked with a GPS.
  3. Compare a sale deed's area with the boundary points.
  4. Convert plot areas into acres or kanal.
  5. Measure many plots from a subdivision plan.

How to Use

  1. Choose easting/northing or GPS coordinates.
  2. Paste the corners in order, one per line.
  3. Read area, perimeter and sides.
  4. Paste plots in a CSV to measure many.

Features

  1. Shoelace area
  2. Perimeter and side bearings
  3. GPS points via UTM
  4. m², ha, acres, ft², kanal, marla
  5. Batch CSV
  6. 100% client-side

FAQs

How is area calculated from coordinates?

With the shoelace formula: multiply each x by the next y, subtract each next x times y, add them up and halve the result.

Can I use GPS coordinates?

Yes. Enter latitude and longitude; they're projected to UTM first so the area is in square metres.

Does the order of corners matter?

Yes. List them in order around the boundary, clockwise or anticlockwise; don't skip across.

Which marla is used?

272.25 ft² per marla and 20 marla per kanal; some areas use 225 ft² marla.

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

The corners, in order around the boundary, give the area by the shoelace (surveyor's) formula A = ½|Σ(xᵢyᵢ₊₁ − xᵢ₊₁yᵢ)| and the perimeter as the sum of side lengths. Each side's length and grid bearing are listed. GPS latitude/longitude points are projected to the UTM zone of their centroid first, giving a plane area accurate for plots up to several kilometres. Results are shown in m², hectares, acres, ft² and kanal/marla (272.25 ft² marla). Batch mode reads many plots.

Calculators & Converters

Calculators & Converters

  • Bearing and Distance Calculator
  • Mileage Reimbursement and Trip Log
  • Ride-Hailing Earnings Calculator
  • Drive Time and Rest Break Planner
  • E6B Flight Computer
  • Crosswind and Headwind Component Calculator
  • Density Altitude Calculator
  • Aircraft Weight and Balance Calculator