This speeds and feeds calculator gives the spindle speed and feed rate for milling and drilling. Pick the workpiece and tool material for a starting surface speed, enter the tool diameter, flutes and chip load, and it gives RPM, feed rate and metal removal rate, capping RPM at your spindle's maximum. Switch between inch and metric. Paste a list of operations to calculate every one. It runs in your browser.
| Tool diameter | RPM | Feed, 3 flutes at 0.002" |
|---|---|---|
| 1/8" | 12,223 | 73.3 in/min |
| 1/4" | 6,112 | 36.7 in/min |
| 1/2" | 3,056 | 18.3 in/min |
| 3/4" | 2,037 | 12.2 in/min |
| 1" | 1,528 | 9.2 in/min |
RPM = SFM × 12 ÷ (π × D) in inches, or Vc × 1000 ÷ (π × D) in mm. A 1/2" carbide end mill at 400 SFM runs about 3,056 RPM.
Feed = RPM × chip load × flutes. 3,056 RPM × 0.002" × 3 flutes = 18.3 in/min.
Run at the maximum RPM and keep the chip load, which lowers the feed rate proportionally.
They're conservative starting points. Use the tool maker's data and adjust for rigidity, coolant and stick-out.
No. Everything runs in your browser.
RPM = surface speed (SFM) × 12 ÷ (π × diameter in inches), or cutting speed Vc (m/min) × 1000 ÷ (π × diameter in mm). Feed = RPM × chip load per tooth × number of flutes. Metal removal rate = feed × axial depth × radial width. If the ideal RPM exceeds the spindle's maximum, RPM is capped and the feed recalculated at that speed so the chip load stays correct. Starting surface speeds are given for HSS and carbide in common materials. Batch mode works through a list of operations.