This coordinate converter translates GPS positions between decimal degrees, degrees-minutes-seconds and UTM grid coordinates. Type a latitude and longitude in any common format, or a UTM reference such as 43R 439112 3487456, and get every other form plus the UTM zone and band, grid convergence and scale factor. Surveyors and GIS users can paste a list of points to convert them all. It runs in your browser with no map service involved.
| City | Zone | Easting | Northing |
|---|---|---|---|
| Lahore | 43R | 439112 | 3487456 |
| Karachi | 42R | 298038 | 2751005 |
| Islamabad | 43S | 319050 | 3728874 |
| London | 30U | 699316 | 5710164 |
| New York | 18T | 583959 | 4507351 |
| Sydney | 56H | 334369 | 6250948 |
Enter the decimal or DMS coordinates; the zone is chosen from the longitude and the easting and northing are calculated on the WGS84 ellipsoid.
Mostly zones 41 to 43; Lahore is 43R, Karachi 42R.
An 8° latitude band; C–M are south of the equator and N–X north.
Older maps may use a local datum such as Kalianpur, which can differ from WGS84 by hundreds of metres.
No. Everything runs in your browser.
Latitude and longitude are read as decimal degrees or degrees, minutes and seconds with N/S/E/W. UTM uses the WGS84 ellipsoid (a = 6,378,137 m, f = 1/298.257223563) and Karney's sixth-order Krüger series in both directions, with k0 = 0.9996, a 500,000 m false easting and a 10,000,000 m false northing in the southern hemisphere. Zones follow the 6° rule with the Norway and Svalbard exceptions; latitude bands C–X are 8° high. The point scale factor and grid convergence are reported. Batch mode converts a column of points either way.