Welding Heat Input Calculator

This welding heat input calculator works out the heat put into a joint for a welding procedure record. Enter the arc voltage, current and travel speed — or the run length and arc time — and choose the process, and it shows the arc energy, the heat input with the process's thermal efficiency, and the travel speed, in kJ/mm and kJ/in. Paste every pass of a procedure qualification to check them against your WPS limits. It runs in your browser.

Example passes

VoltsAmpsmm/minkArc energyHeat input
221001500.60.880.53
241402000.81.010.81
262203000.81.140.92
306005001.02.162.16

When to use it

  1. Fill in a procedure qualification record.
  2. Check passes stay within WPS heat input limits.
  3. Control heat input on quenched and tempered steel.
  4. Compare stick and MIG parameters.
  5. Teach welding metallurgy.

How to Use

  1. Choose the process.
  2. Enter voltage and current.
  3. Enter travel speed, or run length and time.
  4. Read arc energy and heat input; paste passes.

Features

  1. Arc energy and heat input
  2. EN 1011-1 efficiency factors
  3. Speed from length and time
  4. kJ/mm and kJ/in
  5. Batch passes CSV
  6. 100% client-side

FAQs

How do I calculate heat input?

Volts × amps × 60 ÷ (1,000 × travel speed in mm/min) gives kJ/mm of arc energy; multiply by the process efficiency for heat input.

What efficiency factor should I use?

EN 1011-1 uses 1.0 for SAW, 0.8 for MMA, MIG/MAG and FCAW, and 0.6 for TIG and plasma.

Does ASME use the efficiency factor?

ASME IX uses arc energy without the factor; check what your code and WPS require.

How do I get travel speed?

Run length ÷ arc time × 60 gives mm/min.

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

Arc energy (kJ/mm) = voltage × current × 60 ÷ (1,000 × travel speed in mm/min). Heat input = arc energy × the thermal efficiency factor k from EN 1011-1 (submerged arc 1.0; manual metal arc, MIG/MAG and flux-cored 0.8; TIG and plasma 0.6). Travel speed can be entered directly or from run length ÷ arc time. Results are also given in kJ/in. Batch mode reads each pass of a procedure.

Calculators & Converters

Calculators & Converters

  • Weld Metal and Electrode Estimator
  • Coordinate Converter (Lat/Long, UTM, DMS)
  • Plot Area from Coordinates Calculator
  • Bearing and Distance Calculator
  • Mileage Reimbursement and Trip Log
  • Ride-Hailing Earnings Calculator
  • Drive Time and Rest Break Planner
  • E6B Flight Computer