Board Foot Calculator

Work out how many board feet of lumber you are buying. Enter each board's thickness and width in inches, length in feet and quantity — add as many sizes as you need — and the calculator gives the board feet for each line, the total, the volume in cubic meters and, with a price per board foot, the cost. It runs in your browser.

Board feet per 8 ft board

Nominal sizeBoard feet
1 × 64
1 × 128
2 × 45.33
2 × 68
2 × 1013.33
4 × 410.67

When to use it

  1. Price hardwood for a furniture project.
  2. Check a lumber yard invoice.
  3. Total a cut list with several board sizes.
  4. Convert board feet to cubic meters.

How to Use

  1. Enter a board's thickness and width in inches and length in feet.
  2. Enter how many of that board you need.
  3. Add more lines for other sizes.
  4. Enter a price per board foot to see the cost.

Features

  1. Multiple board sizes
  2. Per-line and total board feet
  3. Cubic meter equivalent
  4. Optional cost
  5. 100% client-side

FAQs

What is a board foot?

A volume of wood 1 ft × 1 ft × 1 in, or 144 cubic inches. It's how hardwood is priced in North America.

What thickness do I enter?

The nominal rough thickness the yard charges on — 4/4 (1 in), 5/4 (1.25 in), 8/4 (2 in) — not the planed thickness.

How many board feet in a 2×6×8?

2 × 6 × 8 ÷ 12 = 8 board feet.

Can I enter several sizes?

Yes. Add a line for each board size; the total covers all of them.

Is my data sent anywhere?

No. Everything is calculated in the page.

Technical Details

A board foot is a volume of wood one foot long, one foot wide and one inch thick — 144 cubic inches. Lumber yards measure thickness and width in inches and length in feet, so the formula mixes units: thickness (in) × width (in) × length (ft) ÷ 12, multiplied by the number of boards. A 2 × 6 that is 8 ft long is 2 × 6 × 8 ÷ 12 = 8 board feet. Hardwood is priced per board foot on its nominal rough-sawn thickness, expressed in quarters — 4/4 is one inch, 8/4 is two — so that is the thickness to enter, not the planed size. Several board sizes can be listed at once, each with its own quantity, and the total is shown along with the equivalent volume in cubic meters (one board foot is about 0.00236 m³) and, if a price per board foot is given, the cost. Calculation happens in the page.

Home & DIY Tools

Home & DIY Tools

  • AC Tonnage & BTU Calculator
  • Concrete Mix Ratio Calculator
  • Rebar Weight Calculator
  • Duct Size Calculator
  • Brick and Block Calculator
  • Plaster Calculator
  • Roof Pitch and Roofing Calculator
  • Rafter Length Calculator