This rebar weight calculator works out how much reinforcement steel a job needs, in kilograms and tons, and how many stock bars to buy. Pick a metric bar from 6 to 40 mm or an inch bar from #3 to #11 — the same as 3 to 11 soot on Pakistani sites — enter the cut length, and either type a count or let it work out the bars needed to cover a span at a given center-to-center spacing. A wastage and lap allowance is added, and the total is converted into 12 m or 40 ft stock bars, with an optional price per kg for the steel cost. A reference table lists kg per meter for every common size. Steel fixers and site engineers can paste a full bar schedule with mixed diameters and spacings, and every line is calculated with a total to download. It is free, runs entirely in your browser, and none of your drawings or numbers are uploaded.
| Diameter | kg per meter | kg per 12 m bar | kg per 40 ft bar |
|---|---|---|---|
| 8 mm | 0.395 | 4.74 | 4.81 |
| 10 mm | 0.617 | 7.40 | 7.52 |
| 12 mm | 0.888 | 10.65 | 10.82 |
| 16 mm | 1.578 | 18.94 | 19.24 |
| 20 mm | 2.466 | 29.59 | 30.07 |
| 25 mm | 3.853 | 46.24 | 46.98 |
Weight per meter = diameter in mm squared ÷ 162.2. A 12 mm bar weighs 0.888 kg/m, so 100 m of it is 88.8 kg.
Divide the span by the spacing, round down and add one for the end bar. A 3 m span at 150 mm needs 21 bars.
Soot (sutar) is an eighth of an inch, so 4 soot is 1/2 inch or 12.7 mm, the same as US #4 bar.
Usually 12 m for metric bars and 40 ft in Pakistan, India and the US; set the stock length to match your supplier.
No. Everything is calculated in your browser.
Bar mass per meter is the cross-section π/4 × d² times the density of steel, 7,850 kg/m³, which reduces to d² ÷ 162.2 for d in mm (0.888 kg/m for a 12 mm bar). Inch bars use #n or n soot (sutar) = n/8 inch, so #4 is 12.7 mm. The number of bars across a span at a center-to-center spacing is floor(span ÷ spacing) + 1, counting both ends. Total length is bar length × count plus a wastage and lap allowance, weight is total length × kg per meter, and the stock bars to buy are total length ÷ the stock length (12 m or 40 ft), rounded up, without reusing offcuts between lines. Batch mode reads a bar schedule where each line has either a count or a span and spacing.