Roof Pitch and Roofing Calculator

This roof pitch calculator converts pitch between the 6:12 style, degrees and percent, and works out how much roofing you need. Enter the pitch, or the rise and run, and the building's length and width with the overhang, and it gives the slope factor, the sloped roof area, the area to order with waste, roofing squares and, if you enter a coverage, the number of sheets or bundles. Paste several roofs to total a job. It runs in your browser.

Common pitches

PitchAngleSlope factor
2:129.5°1.014
3:1214.0°1.031
4:1218.4°1.054
6:1226.6°1.118
8:1233.7°1.202
10:1239.8°1.302
12:1245.0°1.414

When to use it

  1. Convert a 6:12 pitch to degrees.
  2. Measure roof area from the building footprint.
  3. Order shingles, tiles or metal sheets.
  4. Check a roof meets a material's minimum pitch.
  5. Total roofs on several buildings.

How to Use

  1. Enter the pitch or rise and run.
  2. Enter building length, width and overhang.
  3. Set waste and optional coverage per sheet or bundle.
  4. Read pitch, area and quantities; paste several roofs.

Features

  1. x:12, degrees and percent
  2. Slope factor
  3. Sloped area from plan
  4. Roofing squares
  5. Sheets or bundles
  6. Batch CSV
  7. 100% client-side

FAQs

What angle is a 6:12 roof?

26.6°, a 50% slope, with a slope factor of 1.118.

How do I work out roof area from the plan?

Multiply the plan area (with overhangs) by the slope factor √(1 + pitch²).

What is a roofing square?

100 square feet of roof surface.

Does it work for hip roofs?

Yes, as long as all planes have the same pitch.

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

Pitch can be entered as rise:run (6:12), an angle (26.6°), a percentage (50%) or a rise and run. Slope factor = √(1 + (rise ÷ run)²). Sloped roof area = plan area including overhangs × slope factor, which holds for gable and hip roofs whose planes share one pitch. The order quantity adds waste and is shown in m², ft², roofing squares (100 ft²) and, with a coverage figure, sheets or bundles. Batch mode reads roofs from a CSV.

Home & DIY Tools

Home & DIY Tools

  • Rafter Length Calculator
  • Drywall Calculator
  • Tile Grout and Adhesive Calculator
  • Fence and Post Calculator
  • Deck Calculator
  • Excavation and Trench Volume Calculator
  • Slope and Gradient Converter
  • Arch Radius from Chord Calculator