Concrete Calculator

Work out how much concrete you need for a patio slab, shed base, footing, fence post or column. Enter the dimensions — rectangular, or round for posts and columns — and the thickness, and the calculator gives the volume, the weight and the number of pre-mix bags in your chosen size. A waste allowance is included so you don't run out mid-pour. It runs in your browser.

Bags per cubic yard / meter

BagYieldBags per yd³Bags per m³
80 lb0.60 ft³4559
60 lb0.45 ft³6079
40 lb0.30 ft³90118
25 kg~12 L6484

When to use it

  1. Pour a shed or garden-room base.
  2. Set fence posts in concrete.
  3. Fill a sonotube for a deck footing.
  4. Decide between bags and ready-mix delivery.

How to Use

  1. Pick metric or imperial.
  2. Choose Rectangle for a slab or footing, or Round for a post hole or column.
  3. Enter the dimensions and thickness.
  4. Choose a pre-mix bag size and read the volume and bag count.

Features

  1. Slabs, footings, post holes and columns
  2. Pre-mix bag counts for common sizes
  3. Weight estimate
  4. Waste allowance
  5. Metric and imperial
  6. 100% client-side

FAQs

How many 80 lb bags make a cubic yard?

About 45, at roughly 0.6 cubic feet of mixed concrete per bag.

How thick should a slab be?

10 cm (4 in) for patios, paths and shed bases; 15 cm (6 in) for driveways and anything carrying vehicles.

Why add 10% extra?

Sub-bases are uneven, formwork bows and some is always lost. Running out mid-pour leaves a weak cold joint, so it's better to have spare.

When is ready-mix better than bags?

Usually above about 1 m³ (1.3 yd³) — that's 80+ bags to mix by hand.

How do I calculate a post hole?

Choose Round, enter the hole's diameter and depth. Subtract the post's own volume if you want to be exact.

Is my data sent anywhere?

No. The calculation happens in the page.

Technical Details

A slab or footing is a rectangular prism, so its volume is length × width × thickness; a column, sonotube or post hole is a cylinder, π × (diameter ÷ 2)² × depth. Dimensions are converted to meters first. A 10% allowance is added by default to cover spillage, an uneven sub-base and formwork that bows slightly under the weight of wet concrete — running out mid-pour leaves a cold joint, which is far worse than a few spare bags. The bag count divides the total by the yield of the chosen bag and rounds up: an 80 lb bag of pre-mix yields about 0.6 cubic feet, so a cubic yard needs 45 of them, and a 25 kg bag yields around 12 liters. Those yields are typical and the printed figure on the bag you buy is authoritative. Weight uses 2,400 kg per cubic meter, normal for cured concrete. The calculation runs in the page.

Home & DIY Tools

Home & DIY Tools

  • Wallpaper Calculator
  • Stair Calculator
  • Gravel Calculator
  • Sand Calculator
  • Mulch Calculator
  • Soil Calculator
  • Paver Calculator
  • Board Foot Calculator