Sand Calculator

Work out how much sand you need for a paver bed, a sandbox, under a shed base or for mixing. Enter the area and depth, pick dry, damp or wet sand, and the calculator gives the volume and approximate weight in metric or imperial. A compaction allowance is included. It runs in your browser.

Sand density by moisture

Conditionkg/m³
Dry~1,600
Damp~1,750
Wet / saturated~1,950

When to use it

  1. Lay a bedding layer under patio pavers.
  2. Fill a children's sandbox.
  3. Check whether a load will fit a trailer's weight limit.
  4. Convert a volume quote into metric tons.

How to Use

  1. Pick metric or imperial.
  2. Enter the area's dimensions and the depth of sand.
  3. Choose dry, damp or wet sand, or enter your own density.
  4. Read the volume and weight.

Features

  1. Volume and weight
  2. Dry, damp and wet density presets
  3. Rectangular or round areas
  4. Compaction allowance
  5. Metric and imperial
  6. 100% client-side

FAQs

How much does a cubic meter of sand weigh?

About 1.6 metric tons dry and up to around 2 metric tons when wet. Moisture makes a big difference, which is why there are three presets.

How thick should a paver sand bed be?

Usually 3–5 cm (1–2 in) of coarse sand screeded over a compacted sub-base.

Why is the default allowance 10%?

Sand compacts more than gravel when screeded and wetted, and bedding layers are never perfectly even.

Does it work for a round sandbox?

Yes — choose Round and enter the diameter.

Is my data sent anywhere?

No. Everything is calculated in the page.

Technical Details

The volume of sand is the area of the job multiplied by the depth of the layer, for a rectangle or a round area, with feet and inches converted to meters before any arithmetic. A 10% allowance is added by default because sand compacts noticeably when it is screeded and wetted, and bedding layers are rarely laid perfectly level. Weight is volume multiplied by bulk density, and with sand the moisture content is the main variable: dry sand is around 1,600 kg per cubic meter, damp sand roughly 1,750 and saturated sand close to 2,000, which is the difference between a load fitting on a trailer and not. The presets reflect that and the density is editable. Volume is reported in cubic meters and liters or cubic yards and cubic feet, and weight in metric tons or US short tons, because sand is sold both ways. The calculation runs in the page.

Home & DIY Tools

Home & DIY Tools

  • Mulch Calculator
  • Soil Calculator
  • Paver Calculator
  • Board Foot Calculator
  • AC Tonnage & BTU Calculator
  • Concrete Mix Ratio Calculator
  • Rebar Weight Calculator
  • Duct Size Calculator