Wallpaper Calculator

Work out how many rolls of wallpaper to buy. Enter the total width of wall to paper and the wall height, choose the roll size and enter the pattern repeat from the label, and the calculator works out the strips you need, how many each roll yields and the rolls to buy. It uses the strips-per-roll method decorators use, so it doesn't run short on patterned paper. It runs in your browser.

Common roll sizes

RollWidthLength
Standard UK/EU0.53 m (21 in)10.05 m (33 ft)
US double roll20.5 in (0.52 m)33 ft (10.06 m)
Wide0.70 m (27.5 in)10.05 m (33 ft)

When to use it

  1. Paper a whole room or a feature wall.
  2. Check how much a large pattern repeat adds.
  3. Compare a UK roll with a US double roll.
  4. Avoid running short mid-job.

How to Use

  1. Pick metric or imperial.
  2. Enter the total width of the walls to paper and their height.
  3. Choose the roll size and enter the pattern repeat.
  4. Read the number of rolls, strips and strips per roll.

Features

  1. Strips-per-roll method
  2. Pattern repeat and trim allowance
  3. UK/EU, US double and wide roll presets
  4. Warns when a strip is longer than a roll
  5. Metric and imperial
  6. 100% client-side

FAQs

How many rolls do I need for a room?

It depends on the wall height and pattern repeat as much as the room size, which is why the calculator works in strips. A typical 4 × 3 m room with 2.4 m walls needs around 8–10 standard rolls.

What is a pattern repeat?

The vertical distance before the pattern repeats. Each strip needs that much extra to line up with its neighbor. It's printed on the roll label; plain papers have none.

Should I subtract doors and windows?

No. The pieces above and below them still have to come from full-length drops to keep the pattern matched. Subtracting them is the most common reason people run short.

Why buy all rolls with the same batch number?

Color can vary slightly between print batches. Mixed batches can show as visible stripes.

Is my data sent anywhere?

No. Everything is computed in the page.

Technical Details

Dividing wall area by roll area underestimates wallpaper, because offcuts cannot be joined into a new strip. This calculator uses the strips-per-roll method instead. Each strip, or drop, has to be the wall height plus one pattern repeat — so the next strip's pattern can be lined up — plus about 10 cm for trimming at the top and bottom. A roll yields a whole number of such strips, and the rest of it is waste. The number of strips needed is the total width of wall divided by the roll width, rounded up. The rolls to buy are strips needed divided by strips per roll, again rounded up. If a single strip is longer than a roll the tool says so rather than returning a number. Doors and windows are deliberately not subtracted: the short pieces above and below them still have to be cut from full-length drops to keep the pattern aligned, so subtracting them is the usual cause of running short. Roll presets cover the standard UK/European roll (0.53 × 10.05 m), the US double roll and a wide roll. It runs in the browser.

Home & DIY Tools

Home & DIY Tools

  • Stair Calculator
  • Gravel Calculator
  • Sand Calculator
  • Mulch Calculator
  • Soil Calculator
  • Paver Calculator
  • Board Foot Calculator
  • AC Tonnage & BTU Calculator