Flooring Calculator

Find out how many boxes of flooring to buy for a room. Enter each room's length and width — add as many rooms as you need — and the coverage printed on the box, add a waste allowance for offcuts, and the calculator gives the number of boxes and how much floor they actually cover. Works for laminate, vinyl plank and engineered wood, in metric or imperial. It runs in your browser.

Waste allowance by layout

LayoutAllow
Straight, large room5–7%
Straight, small or awkward room8–10%
Diagonal12–15%
Herringbone / chevron15–20%

When to use it

  1. Order laminate for a bedroom or living room.
  2. Check a store's flooring estimate.
  3. Compare products with different box sizes.
  4. Plan a herringbone floor with a higher waste allowance.

How to Use

  1. Pick metric or imperial.
  2. Enter the room's length and width.
  3. Enter the coverage per box from the packaging.
  4. Set the waste allowance and read the number of boxes.

Features

  1. Box count from coverage per box
  2. Several rooms or areas totaled
  3. Waste allowance guidance by pattern
  4. Shows the area you'll actually have
  5. Metric and imperial
  6. 100% client-side

FAQs

How much extra flooring should I buy?

5–10% for a straight lay. 15% for diagonal or herringbone. Keep one spare box afterwards for repairs.

Where do I find the coverage per box?

On the box label or the product page, in m² or ft² per pack.

What about an L-shaped room?

Add each rectangle as its own area with the Add button. The calculator totals them before rounding to whole boxes.

Does it include underlay?

No. Underlay is usually sold in rolls; the room area shown is what to cover.

Is my data sent anywhere?

No. It's arithmetic in the page.

Technical Details

Laminate, vinyl plank and engineered wood are sold by the box, and each box states the area it covers. The calculator multiplies the room's length by its width, adds a waste allowance — 8% by default, covering the offcut at the end of each row and the boards lost to defects — and divides by the coverage per box, rounding up because boxes are not split. It also shows the area those boxes actually provide, which is always a little more than needed. A straight lay typically wastes 5–10%; diagonal and herringbone layouts produce many more angled offcuts and need around 15%. Coverage per box is entered in square meters or square feet to match the packaging. Several rooms or the rectangles of an L-shaped room can be listed separately; their areas are totaled and the waste allowance is applied once to the total, since offcuts from one area often finish another. The calculation happens in the browser.

Home & DIY Tools

Home & DIY Tools

  • Concrete Calculator
  • Wallpaper Calculator
  • Stair Calculator
  • Gravel Calculator
  • Sand Calculator
  • Mulch Calculator
  • Soil Calculator
  • Paver Calculator