PCB Trace Width Calculator (IPC-2221)

This PCB trace width calculator sizes copper traces to carry a current without overheating, using the IPC-2221 formula. Enter the current, the temperature rise you'll accept, the copper weight and whether the trace is on an outer or inner layer, and it gives the minimum width in mils and millimetres. Add the trace length to see its resistance, voltage drop and power loss. Paste every power net's current to size them all. It runs in your browser.

Minimum width, 10 °C rise

CurrentOuter, 1 ozInner, 1 ozOuter, 2 oz
0.5 A4.5 mil11.8 mil2.3 mil
1 A11.8 mil30.8 mil5.9 mil
2 A30.8 mil80.0 mil15.4 mil
3 A53.8 mil140 mil26.9 mil
5 A109 mil283 mil54.4 mil
10 A283 mil737 mil142 mil

When to use it

  1. Size power traces on a new board.
  2. Check whether a trace can carry a motor's current.
  3. Compare 1 oz and 2 oz copper.
  4. Estimate voltage drop along a supply trace.
  5. Size every net from a current budget.

How to Use

  1. Enter current and allowed temperature rise.
  2. Choose copper weight and layer.
  3. Optionally enter length for resistance and drop.
  4. Paste net currents to size many traces.

Features

  1. IPC-2221 width
  2. Inner and outer layers
  3. 0.5–3 oz copper
  4. Resistance, drop and loss
  5. mil and mm
  6. Batch CSV
  7. 100% client-side

FAQs

How wide should a 1 A trace be?

About 12 mil (0.3 mm) on an outer layer with 1 oz copper and a 10 °C rise; about 31 mil on an inner layer.

Why are inner traces wider?

Inner layers can't shed heat to air, so IPC-2221 halves the constant and they need about 2.6 times the area.

What temperature rise should I use?

10 °C is a common, conservative choice; 20–30 °C is used where space is tight.

Is IPC-2152 better?

IPC-2152 uses newer measurements and often allows narrower traces; IPC-2221 remains the common conservative rule.

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

IPC-2221 relates current to cross-section: I = k × ΔT^0.44 × A^0.725, where A is in square mils, ΔT the allowed temperature rise in °C, and k = 0.048 for external layers or 0.024 for internal layers. Solving for A and dividing by copper thickness (1 oz/ft² ≈ 1.378 mil, 35 µm) gives the width. Resistance of a trace of given length uses copper resistivity 1.72 × 10⁻⁸ Ω·m adjusted to the trace temperature (ambient + rise), giving voltage drop and power loss. Batch mode reads each net's current and layer.

Electronics Tools

Electronics Tools

  • SMD Resistor Code Decoder
  • dBm, mW and Volts Converter
  • Antenna Length Calculator
  • PoE Power Budget Calculator
  • Ohm's Law Calculator
  • Resistor Color Code Calculator
  • LED Resistor Calculator
  • Voltage Divider Calculator