PoE Power Budget Calculator

This PoE budget calculator checks whether a switch can power everything you plug into it. Enter the switch's total PoE budget, its port standard and number of PoE ports, then list devices with quantities and their PoE class or wattage. It totals the power reserved by class and the expected draw, shows the headroom and utilisation, and warns when a device needs more than the ports provide or the budget is nearly used. It runs in your browser.

PoE classes

ClassAt switchAt deviceStandard
14 W3.84 W802.3af
27 W6.49 W802.3af
315.4 W13 W802.3af
430 W25.5 W802.3at
660 W51 W802.3bt
890 W71.3 W802.3bt

When to use it

  1. Choose a PoE switch for a camera system.
  2. Check whether new access points fit the budget.
  3. Plan VoIP phone deployments.
  4. Decide between PoE+ and 802.3bt ports.
  5. Document power for a network design.

How to Use

  1. Enter the switch budget, standard and ports.
  2. List devices with class or watts.
  3. Read reserved power, draw and headroom.
  4. Fix any port or budget warnings.

Features

  1. IEEE classes 0–8
  2. Reserved vs expected draw
  3. Port standard check
  4. Port count check
  5. Device list from CSV
  6. 100% client-side

FAQs

What is a PoE budget?

The total power a switch can deliver across all PoE ports, often less than the per-port maximum times the number of ports.

What is the difference between PoE, PoE+ and PoE++?

802.3af delivers up to 15.4 W per port, 802.3at (PoE+) 30 W, and 802.3bt Type 3 and 4 up to 60 W and 90 W.

Why is reserved power higher than the device's draw?

Switches allocating by class reserve the full class power; the difference also covers cable loss.

How much headroom should I leave?

Around 20% for start-up surges, heaters in outdoor cameras and future devices.

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

Each device's PoE class (0–8) sets the power reserved at the switch port under IEEE 802.3af, 802.3at and 802.3bt: 15.4, 4, 7, 15.4, 30, 45, 60, 75 and 90 W, and the maximum available at the device: 13, 3.84, 6.49, 13, 25.5, 40, 51, 62 and 71.3 W. A device given only in watts is placed in the smallest class that covers it. Totals are shown both as reserved by class and as expected draw, against the switch budget, with warnings for devices above the port standard, use over 80% and too few ports.

Electronics Tools

Electronics Tools

  • Ohm's Law Calculator
  • Resistor Color Code Calculator
  • LED Resistor Calculator
  • Voltage Divider Calculator
  • Capacitor Code Calculator
  • Battery Life Calculator
  • UPS & Inverter Backup Time Calculator
  • Solar System Sizer