This SMD resistor code calculator turns the tiny marking on a surface-mount resistor into its value. It reads 3-digit codes like 472, 4-digit codes like 1002, codes with an R for the decimal point like 4R7, zero-ohm links, and the EIA-96 codes such as 01C used on 1% parts. Repair technicians can paste a whole column of markings from a board or BOM and decode them at once. It runs in your browser.
| Code | Value | System |
|---|---|---|
| 103 | 10 kΩ | 3-digit |
| 472 | 4.7 kΩ | 3-digit |
| 4R7 | 4.7 Ω | Decimal point |
| 1002 | 10 kΩ | 4-digit |
| 01C | 10 kΩ | EIA-96 |
| 68X | 49.9 Ω | EIA-96 |
47 × 10² = 4,700 Ω, or 4.7 kΩ.
R is the decimal point: 4.7 Ω.
A two-digit index into the E96 value list plus a letter multiplier, for 1% resistors. 01C = 100 × 100 = 10 kΩ.
A zero-ohm link used as a jumper.
No. Everything runs in your browser.
Three-digit codes are two significant digits and a power-of-ten multiplier (472 = 47 × 10² Ω). Four-digit codes are three digits and a multiplier (1002 = 100 × 10² Ω). The letter R marks a decimal point (4R7 = 4.7 Ω, R047 = 0.047 Ω), and 0 or 000 is a zero-ohm link. EIA-96 codes for 1% resistors are a two-digit index into the E96 series (01 = 100 … 96 = 976) followed by a multiplier letter: Z 0.001, Y or R 0.01, X or S 0.1, A 1, B or H 10, C 100, D 1,000, E 10,000, F 100,000.