Capacitor Code Calculator

Read the cryptic markings on ceramic capacitors. Type the code — like 104 or 472K — and the calculator shows the capacitance in picofarads, nanofarads and microfarads at once, plus the tolerance from the letter. You can also go from a value such as 100n back to the code to look for. It runs in your browser.

Common codes

CodepFnF / µF
101100 pF0.1 nF
1021,000 pF1 nF
10310,000 pF10 nF
104100,000 pF100 nF / 0.1 µF
1051,000,000 pF1 µF
22322,000 pF22 nF
4724,700 pF4.7 nF

When to use it

  1. Identify a ceramic capacitor from its marking.
  2. Find which code a 100 nF decoupling capacitor carries.
  3. Convert between pF, nF and µF.
  4. Decode the tolerance letter after the digits.

How to Use

  1. Type the code printed on the capacitor, including any tolerance letter.
  2. Read the value in pF, nF and µF.
  3. Or enter a value in the lower panel to get its code.

Features

  1. 3-digit EIA codes with 8 and 9 multipliers
  2. 2-digit and R-notation markings
  3. Tolerance letters decoded
  4. pF, nF and µF side by side
  5. Value-to-code reverse lookup
  6. 100% client-side

FAQs

What does 104 mean on a capacitor?

10 followed by four zeros, in picofarads: 100,000 pF, which is 100 nF or 0.1 µF. It is the most common decoupling capacitor value.

What do the letters after the number mean?

Tolerance. J is ±5%, K is ±10%, M is ±20% and Z is +80/−20%. B, C and D are absolute tolerances in picofarads, used on very small values.

What does an R in the code mean?

It marks the decimal point: 4R7 is 4.7 pF. It is used for values under 10 pF.

What about a two-digit code like 47?

One or two digits are the value in picofarads directly, so 47 is 47 pF.

Is my data sent anywhere?

No. Decoding happens in the page.

Technical Details

Small ceramic and film capacitors are marked with the EIA three-digit code, always in picofarads. The first two digits are significant figures and the third is the number of zeros to append, so 104 is 10 followed by four zeros: 100,000 pF, which is 100 nF or 0.1 µF. Third digits of 8 and 9 are the rarely seen ×0.01 and ×0.1 multipliers; 6 and 7 are unused and are rejected. A one- or two-digit marking is the value in picofarads directly, and an R marks the decimal point for values under ten picofarads, so 4R7 is 4.7 pF. An optional trailing letter gives the tolerance — J ±5%, K ±10%, M ±20%, Z +80/−20%, and B, C and D as absolute ±pF figures for very small values. Decoded values are shown in pF, nF and µF together. The reverse direction reads a capacitance with any SI prefix, rounds it to two significant figures and builds the code, using R notation below 10 pF; values above 9.9 µF are refused because parts that large carry their value printed directly. Everything is computed in the page.

Electronics Tools

Electronics Tools

  • Battery Life Calculator
  • UPS & Inverter Backup Time Calculator
  • Solar System Sizer
  • Voltage Drop & Wire Size Calculator
  • Cable Ampacity and Derating Calculator
  • Conduit Fill Calculator
  • AWG to mm² Wire Gauge Converter
  • Three-Phase Power Calculator