RC and RL Filter / Time Constant Calculator

This filter calculator finds the cutoff frequency and time constant of RC and RL circuits and the resonant frequency of LC circuits. Enter the component values — 1k, 100n, 10m are fine — and it shows the −3 dB frequency, the time constant and settling time, and the low-pass and high-pass response at any frequency you choose, plus how far a capacitor charges in each time constant. Paste a component list to work through a design. It runs in your browser.

Capacitor charge by time constant

TimeCharged to
1τ63.2%
2τ86.5%
3τ95.0%
4τ98.2%
5τ99.3%

When to use it

  1. Design an anti-aliasing filter before an ADC.
  2. Set a switch debounce time.
  3. Pick a coupling capacitor for audio.
  4. Find the resonant frequency of an LC tank.
  5. Check a snubber or timing network.

How to Use

  1. Choose RC, RL or LC.
  2. Enter the component values.
  3. Read cutoff, time constant and response.
  4. Paste a component list for many filters.

Features

  1. RC and RL cutoff
  2. Time constant and settling
  3. LC resonance
  4. Response and phase at any frequency
  5. Charge table by τ
  6. Batch CSV
  7. 100% client-side

FAQs

How do I calculate RC cutoff frequency?

fc = 1 ÷ (2πRC). 1 kΩ and 100 nF gives about 1.59 kHz.

What is the time constant?

τ = R × C: the time to charge to 63.2% of the final voltage. After 5τ it is 99.3% charged.

What does −3 dB mean?

At the cutoff frequency the output is 70.7% of the input voltage, or half the power.

How steep is a first-order filter?

20 dB per decade (6 dB per octave) beyond the cutoff.

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

RC circuit: time constant τ = R × C and cutoff fc = 1 ÷ (2πRC). RL circuit: τ = L ÷ R and fc = R ÷ (2πL). LC circuit: resonant frequency f0 = 1 ÷ (2π√(LC)) and characteristic impedance √(L/C). A first-order low-pass response is |H| = 1 ÷ √(1 + (f/fc)²) with phase −atan(f/fc); high-pass mirrors it. A charging capacitor reaches 1 − e^(−n) of its final value after n time constants. Batch mode reads R with C or L per row.

Electronics Tools

Electronics Tools

  • PCB Trace Width Calculator (IPC-2221)
  • SMD Resistor Code Decoder
  • dBm, mW and Volts Converter
  • Antenna Length Calculator
  • PoE Power Budget Calculator
  • Ohm's Law Calculator
  • Resistor Color Code Calculator
  • LED Resistor Calculator