This drywall calculator works out how many sheets of drywall or plasterboard a room needs, and roughly how much tape, compound and how many screws to buy. Enter the room's length, width and wall height, the area of doors and windows, whether to board the ceiling, the sheet size and waste, and it gives the sheet count and board area with finishing quantities. Paste every room in a house to total the job. It runs in your browser.
| Sheet | Area |
|---|---|
| 4 × 8 ft | 32 ft² (2.97 m²) |
| 4 × 10 ft | 40 ft² (3.72 m²) |
| 4 × 12 ft | 48 ft² (4.46 m²) |
| 1.2 × 2.4 m | 2.88 m² |
| 1.2 × 2.7 m | 3.24 m² |
| 1.2 × 3.0 m | 3.60 m² |
With 8 ft walls and a ceiling, 528 ft² of board: 17 sheets of 4 × 8, or 19 with 10% waste, before deducting doors and windows.
Yes; 10% is common, more for rooms with many corners and openings.
Roughly 138 lb of ready-mixed compound per 1,000 ft² of board, depending on the finish level.
Longer sheets mean fewer joints to tape but are heavier to handle.
No. Everything runs in your browser.
Board area = 2 × (length + width) × wall height, plus the ceiling if selected, minus openings. Sheets = area ÷ sheet area (4 × 8, 4 × 10, 4 × 12 ft or 1.2 × 2.4/2.7/3.0 m), rounded up after waste. Finishing quantities use ballpark rates per 1,000 ft² of board: about 370 ft of joint tape, 138 lb of ready-mixed compound and 1,000 screws. Batch mode reads rooms with optional height, openings and ceiling.