This tile grout and adhesive calculator tells you how many bags to buy. Enter the area to tile, the tile size, the joint width and depth, the trowel notch size and whether you back-butter, and it gives the grout and adhesive in kg and in bags of the sizes you choose. Paste every tiled area — floors, walls, splashbacks — to total a job. It runs in your browser; check coverage on your product's bag.
| Tile | Joint × depth | kg/m² |
|---|---|---|
| 100 × 100 mm | 2 × 6 mm | 0.384 |
| 200 × 200 mm | 3 × 8 mm | 0.384 |
| 300 × 300 mm | 3 × 8 mm | 0.256 |
| 300 × 600 mm | 3 × 10 mm | 0.240 |
| 600 × 600 mm | 3 × 10 mm | 0.160 |
| 600 × 1200 mm | 3 × 10 mm | 0.120 |
(L + W) ÷ (L × W) × joint width × depth × 1.6 kg. For 300 × 300 mm tiles with 3 mm joints 8 mm deep, about 0.26 kg/m².
About 2.5 kg/m² with a 6 mm notch trowel for wall tiles and 4–5 kg/m² with a 10 mm notch for large floor tiles.
Yes for large format tiles; it adds about 1 kg/m² of adhesive.
Densities and coverage vary by product, so check the manufacturer's figures.
No. Everything runs in your browser.
Grout consumption (kg/m²) = (tile length + tile width) ÷ (length × width) × joint width × joint depth × 1.6, with dimensions in mm — the formula published by grout manufacturers, using 1.6 kg/dm³ for cement grout. Adhesive uses typical coverage for cement-based adhesive by square-notch trowel (about 1.5 kg/m² at 4 mm to 5.5 kg/m² at 12 mm), plus 1 kg/m² for back-buttering. Waste is added and totals are rounded up to whole bags. Batch mode reads tiled areas with their tile sizes.