Tile Calculator

Work out how many tiles to buy for a floor, wall or splashback. Enter the area, the tile size and the grout joint, add a waste allowance for cuts and breakages, and the calculator gives the number of tiles and, if you enter the tiles per box, the number of boxes. Metric or imperial. It runs in your browser.

Tiles per square meter (3 mm joint)

Tile sizeTiles per m²
100 × 100 mm~94
200 × 200 mm~24
300 × 300 mm~11
300 × 600 mm~5.5
600 × 600 mm~2.8

When to use it

  1. Tile a bathroom or kitchen floor.
  2. Plan a splashback or shower wall.
  3. Check a shop's tile estimate.
  4. Compare how many tiles different sizes need.

How to Use

  1. Pick metric or imperial.
  2. Enter the area's length and width.
  3. Enter the tile size and grout joint.
  4. Set the waste allowance and tiles per box, then read the count.

Features

  1. Tile and box count
  2. Grout joint included in the footprint
  3. Waste allowance guidance by pattern
  4. Metric and imperial
  5. Exact-fit rounding
  6. 100% client-side

FAQs

How much extra tile should I buy?

10% for a straight lay, 15% for diagonal or herringbone patterns, and a bit more for small rooms with lots of cuts.

Does the grout joint matter?

A little — it makes each tile take up slightly more space, so you need slightly fewer tiles. On a large floor it can save a box.

Why buy all the boxes at once?

Tile shade varies between production batches. Boxes from different batches can look noticeably different side by side.

How do I handle an L-shaped room?

Split it into rectangles, work each out, and add the results.

Is my data sent anywhere?

No. It is arithmetic in the page.

Technical Details

The tile count is the area to cover, increased by a waste allowance, divided by the area each tile actually occupies — and that footprint includes the grout joint. A 300 × 300 mm tile with a 3 mm joint occupies 303 × 303 mm of floor, about 2% more than the tile itself, which is enough to change the box count on a large room. The result is rounded up to a whole tile, with a guard against floating-point error so that an exact fit is not rounded up to an extra tile. Waste defaults to 10%, the usual figure for a straight lay; diagonal and herringbone patterns produce more offcuts and generally need around 15%. If the number of tiles per box is given, the box count is the tile count divided by it, rounded up. Dimensions can be entered in metric (meters, centimeters, millimeters) or imperial (feet and inches). Everything runs in the browser.

Home & DIY Tools

Home & DIY Tools

  • Flooring Calculator
  • Concrete Calculator
  • Wallpaper Calculator
  • Stair Calculator
  • Gravel Calculator
  • Sand Calculator
  • Mulch Calculator
  • Soil Calculator