Arch Radius from Chord Calculator

This arch calculator finds the radius of a segmental arch from its span and rise — what you need to draw it, set a trammel or make a template. Enter the span and the height at the centre, and it gives the radius, the arc length, the included angle and where the centre point sits, plus a table of heights at even points across the span for marking out the curve. Paste several openings to calculate them all. It runs in your browser.

Examples

SpanRiseRadiusArc lengthAngle
1.00.11.3001.02645.2°
1.20.21.0001.28773.7°
2.00.252.1252.08256.1°
3.00.52.5003.21873.7°
4.01.02.5004.636106.3°

When to use it

  1. Draw an arched door or window head.
  2. Make a template for a brick arch.
  3. Set out a curved garden wall or bridge.
  4. Cut an arched timber frame.
  5. Find the radius of an existing curve.

How to Use

  1. Enter the span and the rise.
  2. Choose how many setting-out points.
  3. Read radius, arc length and angle.
  4. Use the heights to mark out; paste openings for several arches.

Features

  1. Radius from chord and rise
  2. Arc length and angle
  3. Centre position
  4. Setting-out heights
  5. Batch CSV
  6. 100% client-side

FAQs

How do I find the radius of an arch?

R = span² ÷ (8 × rise) + rise ÷ 2. A 3 m span with a 0.5 m rise has a 2.5 m radius.

What is the rise?

The height from the springing line (the chord) to the top of the arch.

Can the rise exceed half the span?

Not for a circular arc of less than a semicircle; at rise = span ÷ 2 it is a semicircle.

How do I mark it out?

Use the heights table: measure up from the chord at each point and join the marks.

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

For a circular arc with chord c and rise (sagitta) h, the radius R = c² ÷ (8h) + h ÷ 2, the included angle θ = 2 asin(c ÷ 2R) and the arc length = R × θ. The centre sits R − h below the springing line. Setting-out heights at points across the span are √(R² − x²) − (R − h), with x measured from the centre. Batch mode reads span and rise per row.

Home & DIY Tools

Home & DIY Tools

  • Water Tank Capacity Calculator
  • Pipe Rolling Offset Calculator
  • R-Value and U-Value Calculator
  • Bar Bending Schedule Maker
  • Paint Calculator
  • Tile Calculator
  • Flooring Calculator
  • Concrete Calculator