This rolling offset calculator gives pipefitters the travel and run for an offset that moves both up and across. Enter the rise and the roll and choose the fitting angle, and it shows the true offset, the travel between fitting centres, the run and how far to rotate the fittings, with the multiplier table for every common angle. Paste a list of offsets to work them all out. It runs in your browser.
| Fitting | Travel | Run |
|---|---|---|
| 11.25° | 5.126 | 5.027 |
| 22.5° | 2.613 | 2.414 |
| 30° | 2.000 | 1.732 |
| 45° | 1.414 | 1.000 |
| 60° | 1.155 | 0.577 |
True offset = √(rise² + roll²); travel = true offset × 1.414 for 45° fittings.
Travel 1.414 and run 1.000 times the offset.
Travel 2.613 and run 2.414 times the offset.
No. Subtract the take-out of both fittings from the travel to get the pipe's cut length.
No. Everything runs in your browser.
For a rolling offset the true offset T = √(rise² + roll²). With fittings of angle θ, travel (centre-to-centre between fittings) = T ÷ sin θ and run (advance along the line) = T ÷ tan θ. For 45° fittings these multipliers are 1.414 and 1.000; for 22.5° they are 2.613 and 2.414. The fittings are rotated by atan(roll ÷ rise) from vertical. Batch mode reads several offsets.