Work out how much paint to buy for a room. Enter the room's length, width and wall height, how many doors and windows to leave out, the number of coats and the coverage from the can, and the calculator gives the liters or gallons needed and how many cans to buy. You can include the ceiling too. It runs in your browser.
| Paint | m² per liter | ft² per gallon |
|---|---|---|
| Flat / satin latex | 10–13 | 350–450 |
| Primer | 8–10 | 300–350 |
| Gloss / eggshell (trim) | 12–16 | 400–550 |
| Masonry paint | 5–8 | 200–300 |
Usually 10–12 m² per coat on a smooth wall, or 350–400 ft² per gallon. The can gives the exact spreading rate.
Two for most repaints. One may do for a similar color over a good surface; bare plaster needs a primer coat first; a dark-to-light change may need three.
Yes, at standard sizes: about 1.8 m² (20 ft²) per door and 1.4 m² (15 ft²) per window.
Rough or porous surfaces, rollers with a long pile and strong color changes all use more than the can's quoted rate.
No. The calculation happens in the page.
The wall area of a rectangular room is its perimeter, 2 × (length + width), multiplied by the wall height. Doors and windows are then deducted at standard sizes — about 1.8 m² (20 ft²) for an interior door and 1.4 m² (15 ft²) for a window — and the ceiling's area can be added. That paintable area is multiplied by the number of coats and divided by the paint's spreading rate, which is printed on the can: typical emulsions cover 10–12 square meters per liter, or 350–400 square feet per US gallon. In imperial mode the coverage is converted from square feet per gallon to square meters per liter internally, so the same formula serves both. The number of cans divides the total by the can size and rounds up. The spreading rate assumes a smooth, previously painted surface; bare plaster, textured walls and big color changes all use more, so the result is a minimum. The calculation runs in the page.