Deck Calculator

This deck calculator turns a deck's size into a materials list. Enter the deck's length and depth, joist spacing, board width and gap, board stock length, number of beams and post spacing, and it gives the number of deck boards, joists and their total length, posts and footings, beam length and screws. Paste several decks or landings to total a project. It runs in your browser; size joists and beams from your local span tables.

6 × 4 m deck, 400 mm joists, 140 mm boards

ItemQuantity
Joists16
Board rows28
3.6 m boards (10% waste)62
Screws896
Posts (2 beams, 1.8 m)10

When to use it

  1. Price a new backyard deck.
  2. Order boards in the right stock length.
  3. Count joists and footings for a permit drawing.
  4. Compare 400 mm and 600 mm joist spacing.
  5. Total a deck with steps and landings.

How to Use

  1. Enter deck length and depth.
  2. Enter joist spacing and board size.
  3. Enter beams and post spacing.
  4. Read boards, joists, posts and screws; paste decks for a project.

Features

  1. Boards by stock length
  2. Joists and total length
  3. Posts and beams
  4. Screw count
  5. Waste allowance
  6. Batch CSV
  7. 100% client-side

FAQs

How many deck boards do I need?

Deck depth ÷ (board width + gap) rows, each needing enough boards to cover the length, plus about 10% waste.

What joist spacing should I use?

400 mm (16 in) is common, and needed for many composite boards; 600 mm suits thicker timber boards.

How many screws?

Two per board at every joist.

Does it size the joists?

No. Use your local span tables for joist and beam sizes.

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

Joists span out from the house and are spaced along the deck length: joists = length ÷ spacing, rounded up, + 1. Board rows = depth ÷ (board width + gap), each row using whole stock lengths, with waste added. Screws = two per board per joist crossing. Posts = (length ÷ post spacing, rounded up, + 1) per beam. Batch mode reads several decks.

Home & DIY Tools

Home & DIY Tools

  • Excavation and Trench Volume Calculator
  • Slope and Gradient Converter
  • Arch Radius from Chord Calculator
  • Water Tank Capacity Calculator
  • Pipe Rolling Offset Calculator
  • R-Value and U-Value Calculator
  • Bar Bending Schedule Maker
  • Paint Calculator