This slope calculator converts any gradient between percent, degrees and a 1:n ratio, and tells you how much fall you need over a length. Enter a slope such as 2%, 1:40 or 1.5°, or a rise and a run, and it shows every form — percent, angle, ratio, per mille, mm per metre, inches per foot — plus the fall over the length you set and whether it's gentle enough for an accessible ramp. Paste a list of pipes, ramps or driveways to convert them all. It runs in your browser.
| Ratio | Percent | Degrees | mm per m |
|---|---|---|---|
| 1:12 | 8.33% | 4.76° | 83.3 |
| 1:20 | 5.00% | 2.86° | 50.0 |
| 1:40 | 2.50% | 1.43° | 25.0 |
| 1:60 | 1.67% | 0.95° | 16.7 |
| 1:80 | 1.25% | 0.72° | 12.5 |
| 1:100 | 1.00% | 0.57° | 10.0 |
2.5%, or 25 mm per metre — a common minimum for 100 mm drains.
At most 1:12 (8.33%) under the ADA, with landings at least every 30 in (760 mm) of rise.
Degrees = arctan(percent ÷ 100). 10% is 5.71°.
No. 100% is 45°: the rise equals the run.
No. Everything runs in your browser.
Any input — percent, per mille, degrees, a 1:n or 1 in n ratio, or a rise and run — is converted to rise per unit run g. Percent = 100g, angle = arctan g, ratio = 1:(1/g), mm per metre = 1000g, inches per foot = 12g. The fall over a length = g × length. Ramps are checked against the ADA 2010 §405.2 maximum of 1:12 (8.33%). Batch mode reads rise and run or a slope per row.