Electricity Bill Estimator

This electricity bill calculator estimates your monthly units and bill from the appliances you use. Edit the list — AC, fridge, fans, lights, pump, washing machine — with watts, hours a day and quantity, enter your utility's tariff slabs, fixed charges and tax rate, and it shows the units, the bill and the average price per unit. It handles both slab styles: each band at its own rate, or every unit at the rate of the band reached. It runs in your browser.

Example slabs: 100 at 10, 200 at 13, 300 at 16, 400 at 20, then 25

UnitsTelescopicAll at band rate
80800800
1501,6501,950
2503,1004,000
3504,9007,000
5008,40012,500

When to use it

  1. See which appliances drive your bill.
  2. Check how many units an extra AC adds.
  3. Stay below a tariff slab limit.
  4. Compare an inverter AC with a fixed-speed one.
  5. Budget electricity for a shop or office.

How to Use

  1. Edit the appliance list with watts, hours a day and quantity.
  2. Enter tariff slabs, fixed charges and tax.
  3. Choose how slabs apply.
  4. Read units, bill and average price per unit.

Features

  1. Appliance list
  2. Monthly units
  3. Slab tariffs, telescopic or not
  4. Fixed charges and tax
  5. Average price per unit
  6. Batch CSV
  7. 100% client-side

FAQs

How do I calculate units from watts?

Units (kWh) = watts × hours × days ÷ 1,000. A 1,500 W AC for 8 hours a day for 30 days uses 360 units.

What is telescopic billing?

Each band of units is charged at its own rate, so only the units above a limit pay the higher rate.

What if my tariff isn't telescopic?

Choose the second option: all units are charged at the rate of the band your total falls in.

Why is my real bill different?

Appliances cycle on and off, and tariffs add adjustments; enter your own slabs, fixed charges and taxes for a closer estimate.

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

Monthly units (kWh) = watts × hours per day × quantity × days ÷ 1,000 for each appliance, summed. The energy charge applies tariff slabs the user enters (units up to each limit and its rate): telescopic billing charges each band at its own rate, while non-telescopic billing charges every unit at the rate of the band the total reaches. Fixed charges are added and taxes applied as a percentage of energy plus fixed charges.

Electronics Tools

Electronics Tools

  • 555 Timer Calculator
  • Op-Amp Gain Calculator
  • RC and RL Filter / Time Constant Calculator
  • PCB Trace Width Calculator (IPC-2221)
  • SMD Resistor Code Decoder
  • dBm, mW and Volts Converter
  • Antenna Length Calculator
  • PoE Power Budget Calculator