Engine Displacement Calculator

This engine displacement calculator works out an engine's size from its bore, stroke and number of cylinders. Enter the dimensions in millimetres or inches and get the displacement in cc, litres and cubic inches, the volume per cylinder, the bore-to-stroke ratio and the mean piston speed at any RPM. Engine builders can check what a bore-out or stroker crank does to capacity, and compare several combinations from a CSV. It runs in your browser.

Well-known engines

EngineBore × strokeCylindersDisplacement
Honda K2086 × 86 mm41,998 cc
Toyota 2JZ86 × 86 mm62,997 cc
VW EA888 2.082.5 × 92.8 mm41,984 cc
Chevrolet 3504.00 × 3.48 in8350 cu in (5,733 cc)

When to use it

  1. Check the new capacity after boring out the cylinders.
  2. Work out what a stroker crankshaft adds.
  3. Convert an engine's size between cc and cubic inches.
  4. Compare bore and stroke options for a build.
  5. Check piston speed at a planned redline.

How to Use

  1. Choose mm or inches.
  2. Enter bore, stroke and number of cylinders.
  3. Optionally enter an RPM for piston speed.
  4. Read cc, litres and cubic inches; paste a CSV to compare builds.

Features

  1. cc, litres and cubic inches
  2. Millimetre or inch input
  3. Volume per cylinder
  4. Bore-to-stroke ratio
  5. Mean piston speed
  6. Batch CSV
  7. 100% client-side

FAQs

How is engine displacement calculated?

π ÷ 4 × bore² × stroke gives one cylinder's swept volume; multiply by the number of cylinders. An 86 × 86 mm four-cylinder is 1,998 cc.

How do I convert cc to cubic inches?

Divide by 16.387. A 5,735 cc engine is 350 cubic inches.

What does oversquare mean?

The bore is larger than the stroke. Oversquare engines usually rev higher; undersquare (long-stroke) engines favour low-RPM torque.

What is a safe piston speed?

Most road engines stay under about 20–25 m/s mean piston speed; racing engines go higher with special parts.

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

Displacement = π ÷ 4 × bore² × stroke × number of cylinders. With bore and stroke in millimetres the result is divided by 1,000 for cubic centimetres; cubic inches = cc ÷ 16.387064. Bore and stroke can be entered in mm or inches. The bore-to-stroke ratio classes the engine as oversquare, square or undersquare, and mean piston speed = 2 × stroke × RPM ÷ 60. Batch mode compares bore, stroke and cylinder options from a CSV.

Calculators & Converters

Calculators & Converters

  • Compression Ratio Calculator
  • Horsepower, Torque and kW Calculator
  • Wheel Offset and Backspacing Calculator
  • Motorcycle Sprocket and Chain Calculator
  • 2-Stroke Fuel Mix Ratio Calculator
  • EV Charging Time and Cost Calculator
  • VIN Decoder and Check Digit Validator
  • Vehicle Running Cost per km Calculator