Horsepower, Torque and kW Calculator

This calculator links torque, RPM and power. Enter torque at an RPM to get horsepower, metric horsepower (PS) and kilowatts, or enter power to get the torque behind it, in N·m, lb·ft and kgf·m. Paste a dyno sheet of RPM and torque (or power) and it fills in every unit for each row and marks the torque and power peaks. It is handy for comparing spec sheets from different countries, checking a dyno run or understanding why peak power arrives at higher RPM than peak torque. It runs in your browser.

Unit conversions

FromToMultiply by
kWhp1.341
kWPS1.360
hpkW0.7457
lb·ftN·m1.3558
N·mlb·ft0.7376
kgf·mN·m9.807

When to use it

  1. Convert a European PS or kW figure to horsepower.
  2. Work out horsepower from a torque figure and RPM.
  3. Fill in the missing column of a dyno sheet.
  4. Compare engines quoted in different units.
  5. Find the torque an electric motor makes at a given power and speed.

How to Use

  1. Choose torque → power or power → torque.
  2. Enter the value, its unit and the RPM.
  3. Read kW, hp, PS and torque in every unit.
  4. Paste a dyno sheet to convert every row and find the peaks.

Features

  1. Torque to power and back
  2. kW, hp and PS
  3. N·m, lb·ft and kgf·m
  4. Dyno sheet batch mode
  5. Torque and power peaks marked
  6. 100% client-side

FAQs

How do I calculate horsepower from torque?

hp = torque (lb·ft) × RPM ÷ 5,252. In metric, kW = torque (N·m) × RPM ÷ 9,549.

What is the difference between hp and PS?

Mechanical horsepower is 745.7 W; metric horsepower (PS, CV, ch) is 735.5 W, so an engine rated 100 kW is 134 hp or 136 PS.

Why do torque and horsepower cross at 5,252 RPM?

Because hp = lb·ft × RPM ÷ 5,252, the two numbers are equal at exactly 5,252 RPM when torque is in lb·ft.

Why is dyno power lower than the brochure?

Chassis dynos measure at the wheels, after gearbox and drivetrain losses; brochures quote crank power.

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

Power (kW) = torque (N·m) × 2π × RPM ÷ 60,000, equivalent to hp = lb·ft × RPM ÷ 5,252. Torque converts between N·m, lb·ft (1 lb·ft = 1.3558 N·m) and kgf·m (9.80665 N·m); power between kW, mechanical horsepower (745.7 W) and metric horsepower PS/CV (735.5 W). Either torque or power can be the input, at a given RPM. Batch mode reads a dyno sheet of RPM with torque or power, fills in the other in every unit and marks the torque and power peaks.

Calculators & Converters

Calculators & Converters

  • Wheel Offset and Backspacing Calculator
  • Motorcycle Sprocket and Chain Calculator
  • 2-Stroke Fuel Mix Ratio Calculator
  • EV Charging Time and Cost Calculator
  • VIN Decoder and Check Digit Validator
  • Vehicle Running Cost per km Calculator
  • Metal Weight Calculator
  • Beam Deflection and Bending Calculator