VIN Decoder and Check Digit Validator

This VIN decoder checks a vehicle identification number without sending it anywhere. It confirms the VIN has 17 valid characters, validates the check digit, and reads what the VIN itself encodes: the region and country of manufacture, the manufacturer for common makers, the model year, the assembly plant code and the serial number. Dealers and buyers can paste a list of VINs to spot typos and mismatched years in bulk. Model, trim and engine details need the manufacturer's records, such as NHTSA's free vPIC database.

Model year codes (position 10)

CodeYearCodeYear
A2010L2020
B2011M2021
C2012N2022
D2013P2023
E2014R2024
F2015S2025
G2016T2026
H2017V2027
J201892009
K201912001

When to use it

  1. Spot a mistyped VIN before registering or insuring a car.
  2. Check the model year on a used-car listing.
  3. Validate a dealer stock list in bulk.
  4. See where a vehicle was built.
  5. Check an import's VIN before shipping.

How to Use

  1. Type or paste the 17-character VIN.
  2. Read the check digit result, model year and manufacturer.
  3. Paste a list of VINs to check them all.

Features

  1. Check digit validation
  2. Model year
  3. Region and country
  4. Manufacturer for common WMIs
  5. Plant and serial
  6. Batch VIN list
  7. Works offline

FAQs

What is the VIN check digit?

Position 9 is calculated from the other 16 characters. If it doesn't match, the VIN has a typo — or it is a non-North-American VIN, where the check digit is optional.

How do I find the model year from a VIN?

Position 10: A = 2010, B = 2011 … Y = 2030, with 1–9 for 2001–2009; the letters repeat every 30 years.

Why are I, O and Q never used?

They are too easily confused with 1 and 0.

Can it show the model and engine?

Not offline. Those come from the manufacturer's data, which NHTSA's vPIC service publishes.

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

A 17-character VIN never uses I, O or Q. The check digit (position 9) is computed under ISO 3779 / 49 CFR 565: each character is transliterated to a number, multiplied by weights 8,7,6,5,4,3,2,10,0,9,8,7,6,5,4,3,2, summed and taken modulo 11, with 10 written as X. The first character gives the region and the first two the country (ISO 3780 ranges); the first three are the World Manufacturer Identifier, matched against a built-in list of common makers. Position 10 encodes the model year in a 30-year cycle; for North American vehicles a letter in position 7 means 2010 or later. Position 11 is the plant and 12–17 the serial number.

Calculators & Converters

Calculators & Converters

  • Vehicle Running Cost per km Calculator
  • Metal Weight Calculator
  • Beam Deflection and Bending Calculator
  • Bolt Torque and Preload Calculator
  • Tap Drill and Thread Chart
  • ISO Fits and Tolerances Calculator
  • Spur Gear Calculator
  • Pulley and Belt Calculator