EV Charging Time and Cost Calculator

This EV charging calculator estimates how long a charge will take and what it will cost. Enter the usable battery size, the charge you start and finish at, the charger's power and the most your car can accept, plus your electricity price, and it shows the charging time, the energy drawn including losses, the cost and the range added. It models the slow-down above 80% that most cars have. Fleet managers can paste a list of vehicles. It runs in your browser.

Time for 20–80% of a 60 kWh battery

ChargerEfficiencyTime
2.3 kW socket90%17.4 h
7.4 kW wall box90%5.4 h
11 kW AC90%3.6 h
22 kW AC90%1.8 h
50 kW DC95%46 min
150 kW DC95%15 min

When to use it

  1. Know how long an overnight home charge will take.
  2. Compare a 7 kW wall box with a 3-pin socket.
  3. Estimate a rapid-charging stop on a road trip.
  4. Work out the cost per 100 km against petrol or diesel.
  5. Plan charging for a fleet of vans.

How to Use

  1. Enter the usable battery size and starting and target charge.
  2. Enter the charger power and the car's limit.
  3. Enter efficiency, price per kWh and any session fee.
  4. Read time, cost and range added; paste a fleet CSV for many vehicles.

Features

  1. Charging time
  2. Cost including losses
  3. Range added
  4. Car and charger power limits
  5. Slow-down above 80%
  6. Fleet CSV
  7. 100% client-side

FAQs

How long does it take to charge an EV?

Energy needed ÷ charging power, plus losses. 60% of a 60 kWh battery is 36 kWh, about 40 kWh from the grid at 90% efficiency, so roughly 5.4 hours on a 7.4 kW charger.

Why doesn't my car charge at the charger's full power?

On AC the car's onboard charger limits the rate (often 7–11 kW); on DC the car's maximum and battery temperature do.

Why does charging slow down after 80%?

Cars reduce power near full to protect the battery, so the last 20% can take as long as the 20–80%.

How much energy is lost?

Typically 10–15% on AC and less on DC.

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

Energy into the battery = usable capacity × (target − starting charge)%. Energy drawn from the grid = that ÷ charging efficiency. Charging power is the lower of the charger and the car's limit (its onboard charger on AC, its peak on DC). Above 80% the car charges at a chosen fraction of that power to model the taper. Time = energy ÷ power for each part; cost = grid kWh × price + any session fee; range added = battery kWh ÷ consumption. Batch mode reads one vehicle per row.

Calculators & Converters

Calculators & Converters

  • VIN Decoder and Check Digit Validator
  • Vehicle Running Cost per km Calculator
  • Metal Weight Calculator
  • Beam Deflection and Bending Calculator
  • Bolt Torque and Preload Calculator
  • Tap Drill and Thread Chart
  • ISO Fits and Tolerances Calculator
  • Spur Gear Calculator