Metal Weight Calculator

This metal weight calculator works out how much a piece of metal weighs from its shape and size. Choose the metal — mild steel, stainless, aluminium, copper, brass and more — and the shape: plate, flat bar, round, square or hex bar, round or rectangular tube, or angle. Enter the dimensions in millimetres and the length, and get the weight per metre, per piece and for the quantity, plus the cost if you enter a price per kg. Paste a whole cutting list to weigh a job. It runs in your browser.

Mild steel weight per metre

Sectionkg/m
Round bar 10 mm0.617
Round bar 20 mm2.466
Square bar 25 mm4.906
Flat bar 50 × 6 mm2.355
Angle 50 × 50 × 5 mm3.729
Box 50 × 50 × 3 mm4.427
Pipe 60.3 × 3.91 mm (2 in Sch 40)5.437
Plate 10 mm (per m²)78.5

When to use it

  1. Price a steel order by weight.
  2. Check the load on a crane or trailer.
  3. Estimate shipping weight for fabricated parts.
  4. Compare aluminium and steel for a frame.
  5. Weigh a whole cutting list for a job.

How to Use

  1. Choose the metal and shape.
  2. Enter the dimensions in mm and the length.
  3. Enter quantity and optionally price per kg.
  4. Read the weight; paste a cutting list for a whole job.

Features

  1. 13 metals
  2. 8 shapes
  3. kg/m and lb/ft
  4. Total weight and cost
  5. Cutting list CSV
  6. 100% client-side

FAQs

How do I calculate the weight of a steel plate?

Length × width × thickness × 7,850 kg/m³. A 1 m × 1 m × 10 mm plate weighs 78.5 kg.

How much does a steel round bar weigh per metre?

π/4 × d² × 7,850 kg/m³: a 20 mm bar is 2.47 kg/m.

Why does my supplier's figure differ slightly?

Rolled sections have rounded corners and alloys vary in density; suppliers publish exact kg/m for standard sections.

Can I add a price?

Yes. Enter the price per kg to get the cost.

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

Weight = cross-section area × length × density. Areas: plate and flat bar b × t; round bar πd²/4; square bar a²; hex bar (√3/2) × AF²; round tube π/4 × (OD² − ID²); rectangular tube B·H − (B − 2t)(H − 2t); angle t(a + b − t). Densities are typical (steel 7,850, stainless 8,000, aluminium 2,700, copper 8,960, brass 8,500 kg/m³). Results show kg per metre, lb per foot, each piece and the total; batch mode reads a cutting list.

Calculators & Converters

Calculators & Converters

  • Beam Deflection and Bending Calculator
  • Bolt Torque and Preload Calculator
  • Tap Drill and Thread Chart
  • ISO Fits and Tolerances Calculator
  • Spur Gear Calculator
  • Pulley and Belt Calculator
  • Spring Rate Calculator
  • Hydraulic Cylinder Force Calculator